please tabang modem router, router problem

[yjan]

---

Please tabangi ko ani mga experts naa koy existing na connection which is globe broadband ok ra ang dsl connection.

Globe > modem router > PC1 = ok

Pero nag palit ko ug bag o na linksys router (WRT54G) para naa sad dsl connection ako PC2. Wala syay connection sa PC2 ang PC1 ra naay connection sa DSL


> PC1 = connected to DSL (ok)
Globe > modem router > router (WRTG54G)
> PC2 = not connected to DSL(not ok)

Unsa man ako angay buhaton ani mga experts….salamat kayo sa inyo tabang

[giglis]

if u disconnect pc1, would pc2 connect?

[errol]

bro pila di ka ports ang modem/router sa globe?? dli pwde imo i connect directly ang pc1 and pc2 sa globe modem/router??

[cloud]

set it up this way.

globe modem router connected to linksys router port WAN

pc1 connected to linksys router LAN port #1
pc2 connected to linksys router LAN port #2

hope this helps...

[lamangzz]

may chance na sayop ang configuration sa ip sa imo pc2. and then question diay. how did u configure ur linksys? kay since router to sya maybe naa sad ka na miss didto. pede nimo ma hatag diri unsa ang ip sa imo linksys? then sa pc1 and pc2? para ma check nato? ok ra? :mrgreen:

[monrose29]

try to ask sa GLOBE first if kana imong account is maka allow og two ip address,

coz some personal account or residential account is allow to have one ip address only.. or one pc.. if you going to share it or have another pc.. then you have to make your first pc as your gateway so you need to configure either your modem router or your pc1 to act as your gateway...

[orenrak]

the reason why u use the router is, share internet connection. so, bisan usa ra ka IP ang ihatag sa ISP, kaya na ishare sa router. naa man cya NAT. what you need to check prior connecting the linksys router is the IP you're getting directly from the modem/router. if it's 192.168.1.x, the u nid to change the IP of the router to something else, 192.168.2.1 orbisan unsa basta dili sud sa range sa IP nimo straight from the modem. i make wonders with a llinksys router

[ed_ebs]

Please tabangi ko ani mga experts naa koy existing na connection which is globe broadband ok ra ang dsl connection.

Globe > modem router > PC1 = ok

Pero nag palit ko ug bag o na linksys router (WRT54G) para naa sad dsl connection ako PC2. Wala syay connection sa PC2 ang PC1 ra naay connection sa DSL


> PC1 = connected to DSL (ok)
Globe > modem router > router (WRTG54G)
> PC2 = not connected to DSL(not ok)

Unsa man ako angay buhaton ani mga experts….salamat kayo sa inyo tabang

based sa muha gi hatag nga sketch sa connections nmo, it suppose to run ok...
try check bro if naka dhcp muha router, then try sad nga ang muha pc2 is naka automatic ip.
if nahan ka nga static, adto sa pikas pc then run ipconfig then copy ang settings including gateway and
dns (pwedi ra dli and dns kay ang router man ang needed anang dns if cya ang mo connect first sa internet), then
adto kas pc2 then manually add ip nga different sa isa but with same subnet, then put the same gateway address sad.

try after ana if ma ok ba.. if not, basin guba ang muha lancard or wala ma install ang yaha driver.

[HOmebRew]

Bro,
Ang solution ana kay i bridge configuration nimo ang usa ka router..kay modem router man na imo...mag conflict mana cla sa mag-manage sa IP address (DHCP man ang duha...dapat usa ra)...e-set lng imo linksys ug access point dili gateway.. :mrgreen:

[yjan]

Bro,
Ang solution ana kay i bridge configuration nimo ang usa ka router..kay modem router man na imo...mag conflict mana cla sa mag-manage sa IP address (DHCP man ang duha...dapat usa ra)...e-set lng imo linksys ug access point dili gateway.. :mrgreen:

bro,

wala man sya access point ang naa ra is router and gateway sa advanced routing