back to back connections

[anggwaponi]

---

[monrose29]

hehehehe, pagka lawom sa imong problema daw sapa ni eva nga deli matugkad..

ug ani-a ako tampo kanimo higala...

gamita ang cross connect nga cable bro

WINDOWS XP(usa lang ka lan card gamita)

LANCARD CONFIGURATIONif na configure na nmo before then familiar naka asa sulod)

1. go to network neighborhood/places click network connection

2. double click LAN (local network connection) click properties

3.General, scroll down double click TCP/IP

4. click use the following ip address

5. IP ADRESS: 192.168.0.1 SubnetMask: 255.255.255.0 Default Gateway: 192.168.0.1 and click OK

TURN OFF FIREWALL

repeat the step no.1 and no.2 then click on advance, then setting, then choose that Off(Not Recommended)


WINDOWS 98

righ click on network neighborhood then look for TCP/IP configure your IP ADDRESS with 192.168.0.2 Gateway: 192.168.0.1 you can also put the DOMAIN: 192.168.0.1

NOTE:

kong mag file sharing ka tan-awa sa network properties kong naka install ba ang NETBIOS ilabina ang WINDOWS98, sa imong WINDOWS XP pod tan-awa kong naka check ang file and print sharing..

nig ka human e connect imong cross connect cable, and try og ping sa ip. unsa-on pag ping?

1.click start, click run, type command for windows 98, type cmd for windows xp

2. type sa ug ipconfig /all mo display na imong gi config nga ip address e double check kong sakto ba

3. kong na-a ka sa windows xp imong e ping ang windows98

4. e ping nmo ang ip address sa windows 98(192.1680.2)

5. na-a na naka sa DOSCOMAND..

sample:

windows xp:

C:\Documents and Settings\user> ping 192.168.0.2

dapat na-a sya reply..

sa windows98 d same ra gihapon

C:\Documents and Settings\user> ping 192.168.0.1


testinge daw...

[anggwaponi]

gamita ang cross connect nga cable bro

WINDOWS XP(usa lang ka lan card gamita)

LANCARD CONFIGURATIONif na configure na nmo before then familiar naka asa sulod)

1. go to network neighborhood/places click network connection
2. double click LAN (local network connection) click properties
3.General, scroll down double click TCP/IP
4. click use the following ip address
5. IP ADRESS: 192.168.0.1 SubnetMask: 255.255.255.0 Default Gateway: 192.168.0.1 and click OK

TURN OFF FIREWALL

repeat the step no.1 and no.2 then click on advance, then setting, then choose that Off(Not Recommended)


WINDOWS 98

righ click on network neighborhood then look for TCP/IP configure your IP ADDRESS with 192.168.0.2 Gateway: 192.168.0.1 you can also put the DOMAIN: 192.168.0.1

NOTE:

kong mag file sharing ka tan-awa sa network properties kong naka install ba ang NETBIOS ilabina ang WINDOWS98, sa imong WINDOWS XP pod tan-awa kong naka check ang file and print sharing..

nig ka human e connect imong cross connect cable, and try og ping sa ip. unsa-on pag ping?

1.click start, click run, type command for windows 98, type cmd for windows xp
2. type sa ug ipconfig /all mo display na imong gi config nga ip address e double check kong sakto ba
3. kong na-a ka sa windows xp imong e ping ang windows98
4. e ping nmo ang ip address sa windows 98(192.1680.2)
5. na-a na naka sa DOSCOMAND..

sample:

windows xp:

C:\Documents and Settings\user> ping 192.168.0.2

dapat na-a sya reply..

sa windows98 d same ra gihapon

C:\Documents and Settings\user> ping 192.168.0.1

hello kaninyong tanan ug maayong adlaw sab kaninyo ilabi na nimo bai monrose29.

bai monrose29 bisan taud2x na sab ni imo posting pero wa pa nako sulayi ang imong suggestions kay ako gi-check last week ug naa man ko gikahibugngan. natingala ko ug dako ug samot man hinuon ko naglibog kay naa man mga aspeto nga present o naa ang configuration ug wa sab ang uban.

ako na lang kaha ibutang nganhi unsa akong nakita. ug mao ni:

[Pentium III win 98 256 MB with 3Com LAN card PCI socheted]

NETWORK CONFIGURATIONS (settings):

Client for Microsoft Network
Microsoft Family Logon
Dial-up Adapter
TCP/IP
File and Printer Sharing for Microsoft Networks

ug unya ang kani File and Printer Sharing kay naka-check na ang:

I want to be able to give others access to my files
I want to be able to allow others to print to my printers

so asa man ana sa nga parta sa iyang NETWORK CONFIGURATIONS (settings) ang i-disable o ilisan? ug asa man na makita o makuha ang NETBIOS?

korehe ko pero di ba maayo ilisan ang kanang settings Microsoft Family Logon ngadtu sa pagka-Client for Microsoft Networks?

o unsa diay ang kalainan aning duha Microsoft Family Logon ug Client for Microsoft Networks?

salamat daan bai monrose29 sa imo unyang pagabatbatun nga tubag ani akong pangutana ug sa uban sab basin gusto mo motampo sa inyong ka-eksperto ug para ma-refresh sab inyo nahibaluan.

matsalams.