CPU Cooler ang angay ma recommend ninyo?

[LadYKilleR8520]

---

my 4770 stock hits easily 102 degrees in first 5 minutes when in rendering.
re seat - done
re apply thermal paste - done
improve case airflow - done (5x 120mm fans 1-at bottom intake, 2 at top exhaust, 1 at front intake, 1 at rear exhaust)
still 102 degrees at render.

now tell me if that isnt alarming.
so i bought a thermaltake nic f3. stable 68-72deg max depending on room temperature (no aircon) i still think this temp is high..... id like to hover around the 60deg mark when in render mode.

when i render we are talking hours upon hours, sometimes even overnight.
an AIO water cooler would have been a better solution for me considering how i use the machine, but i was having doubts if i could fit an h100i on my RL01 case. it could fit but barely and didnt want to take the chance it didnt fit.

take a temperature reading and lets work from there.

REASON : Its a Haswell chip..

ahahahah...anyways you need a beefier cooler if that's your application. Im using a Coolermaster TPC 812. best air cooler according to Top 5 Heatsink Charts on FrostyTech.com. I didn't use haswell chips for this reason, but 102C is quite alarming. Even with a stock cooler, my 17-3770k ran only 87C at max with prime95 small FFTs

[buddy&sale]

REASON : Its a Haswell chip..

ahahahah...anyways you need a beefier cooler if that's your application. Im using a Coolermaster TPC 812. best air cooler according to Top 5 Heatsink Charts on FrostyTech.com. I didn't use haswell chips for this reason, but 102C is quite alarming. Even with a stock cooler, my 17-3770k ran only 87C at max with prime95 small FFTs

tagpila pod ng Coolermaster TPC 812...nanay availble ana dire cebu?

[MarXX]

@MarXX bos unsa renderer imo use? sa una mag render ko studio max using my i5 760 max ug 60-70 ra man.

revit 2014. kana gud mag test render. kana overnight is usually final render/s. samokan nako balhin 3dmax.
i know max is more than 50% faster pero usahay kung test render ra, no need to transfer just for that. kung final render sad, its only one or two views nga pa-igat gamay.
the worst case scenario is pi-it na kos oras, ill render in max sa background while mag edit ko in revit. kana mura nana gi gangbang ako CPU ana.
kabantay sad ko murag mas bugnaw ang processor when i render in 3dsmax kaysa mag render in revit. init kaayo kung revit gamiton.
revit rendering is like running prime 95. about the same ila temps. revit being lower by 1 or 2 degrees.

[MarXX]

REASON : Its a Haswell chip..

ahahahah...anyways you need a beefier cooler if that's your application. Im using a Coolermaster TPC 812. best air cooler according to Top 5 Heatsink Charts on FrostyTech.com. I didn't use haswell chips for this reason, but 102C is quite alarming. Even with a stock cooler, my 17-3770k ran only 87C at max with prime95 small FFTs

wanted to install a hyper 212 plus pero mu sangko sa ako case. kapoyan nako balhin kaha just for a cooler.

[archt_vin]

kasuway gali ko render 6ft x 11ft sa max...nahuman na lang ang isa ka adlaw wala pa kaabot 50%

[MarXX]

dako sad kaayo na. its a billboard.
would an overclocked 8 core AMD 8350 chip do better?
nakoy feeling mu alimo-ot and kwarto nako if AMD ako gamiton....

[archt_vin]

yah i know, mao na wala nako to buhata na usab.

[MarXX]

actually kaya raman na i-render bah, over the weekend lang..... and u cant game while rendering.
even better is if the scene is final, register another email address to autodesk and use their cloud renderer. grabe ka paspas ma human pero timplahunon ang materials.....

[missrobin7]

mangutana sa ko TS...

1. unsa imong case?
2. unsa imong RAM?
3. unsa imong mobo?
4. last but not the least, hangtud pila taman imo budget?

yep! salamat sa pangutana boss! gi update na nako ang posts, daghan jud diay kog na miss na essentials para mas klaro.

- - - Updated - - -

Technically you dont really need an aftermarket cooler, im thinking high end imong graphics card? anyways, better post specs para mabaw.an imong expected CPU heat..

Don't take this the wrong way, but you have a K-processor, and since your asking about coolers, I'm guessing you have very small idea about overclocking..

anyways, lets try to fix your case airflow first before we get on to buying a cooler shall we?

yep, no worries.. ang nabal-an ra nako anang OC kay ang meaning ra gyud... planning to play with that pero wa pa koy confidence...hehehe


niya sa tanan, salamat kayo mga masters sa concern and replies...

[butitoy]

dako sad kaayo na. its a billboard.
would an overclocked 8 core AMD 8350 chip do better?
nakoy feeling mu alimo-ot and kwarto nako if AMD ako gamiton....

that would bow down to intel core i series quad core.