Need help with my RIG

[pocketbell]

---

ako mani gisuwayan before nako gikuha since naka taud pa jd ni sa iyang casing..amu gi shutdown..on..played games (all on max settings) checked videos, etc...after an hour, i decided to take it..so amu gi disassemble..
wa ba kaha ni na daot pag assemble namu?

[Iamalbertrebs]

hmmmmmm.. depende pud basin, wala man pud na ingon natagak? naigog static or unsa? check daw ang mga capacitors wala bay nangaburot(sa vcard)

[pocketbell]

yep..wala sad ni natagak..ako pa e double check if naay nangaburot ani..
what if naay magborot..unsay pasabot ana? and pwede pana ma ayo? heheh
and regarding anang naigo ug static, ma ulian rana?

[butitoy]

good day!
i bought a second hand i5 gaming rig here and asked my friend to assemble it. when we first tried to power it, it did turn on for at least 2 seconds but then it went off. (tried it like 3 times)

kuwang ang parts to power it.
shorted board

check connections.

we found out that he forgot to put the sata connector coming from the PSU to the hhd..we figured that out, but, he also forgot to put the cord that gives power to the mobo.

HDD had nothing to do with it.
what you mean power cord? maybe the 12v eps to the mobo from the PSU


your mobo requires 4+4pin 12v EPS

the Mobo will not turn on if nalimtan ni ug taud.

after making sure that everything has been connected properly, we tried to turn it on again and it did work. it was running perfectly. so we then decided to turn it off and put the monitor on to install the OS, etc.

after installing the monitor, we were surprised as it won't turn on now.
it didn't even start.

shorted mobo sa stand offs probably

or

unpowered VC, the HD7770 needs 6pin PCI-E


try to assemble it outside sa casing with just bare minimum : Mobo + procie + RAM + PSU

try if mu- on bah.

i'm pretty sure that the specs i bought was in a good working condition as i have tested it on the day that i bought it.
any idea what could have caused this?
and if naa moy ma suggest na shop or person na duol dre sa pardo, please let me know para ma duol nako ug mapatan aw nako ni.
thanks!

procei: i5 3rd gen
vcard: sapphire hd 7770
mobo: gigabyte z77-d3h
memory: 8gig ballistic ram
PSU: silverstone strider plus 500w (80 plus bronze)
500g WD hhd

padung ko talisay ugma morning bro, kay walay work < thanks GOD it's Holiday! >

i can pass by your place.

[pocketbell]

padung ko talisay ugma morning bro, kay walay work < thanks GOD it's Holiday! >

i can pass by your place.

cge bro..i'll be out by 10:00AM tomorrow..txtsan lang nya tka..
by the way, mu on naman jd..naa nasad display, however, once i plug the video card on, the display won't show but the cpu will run normally.

[radz16]

cge bro..i'll be out by 10:00AM tomorrow..txtsan lang nya tka..
by the way, mu on naman jd..naa nasad display, however, once i plug the video card on, the display won't show but the cpu will run normally.

Pagtaod nimo sa video card kay imoha gibalhin ug paslak ang cable para sa monitor paingon sa paslakanan sa video card? or didto gihapon sa motherboard nakapaslak ang cable sa monitor?

[butitoy]

cge bro..i'll be out by 10:00AM tomorrow..txtsan lang nya tka..
by the way, mu on naman jd..naa nasad display, however, once i plug the video card on, the display won't show but the cpu will run normally.

if tauran nimo ug Vcard

adto sa VCard itaud ang monitor

kay ma disable ang on board video sa procie

naa na speaker your mobo?

[Iamalbertrebs]

fighter kaayo na c boss butitoy TS.. he can help you very well .. paminaw nako kay naay something ang vcard either kamtayonon nani daan pagpalit/na mishandled ni(hope not

[wylliexhan]

@pocketbell when you install the graphics card bro does it have a beepcode? if naay beepcode ka isa, it's working perfectly, maybe the vga/hdmi cable nataod nimo sa onboard graphics vga/hdmi not in the vga/hdmi port of the graphics card.

[pocketbell]

thank you all!
my rig is now working...