HELP: Printer Ink is bubbly on wires.

[enimavix]

---

need na nmo i reset imo printer. try to search sa imo model or similar how to do it. naa mi canon printer before naka ciss. ink empty ang problem(ignore that bubbles, unless nalang if d jud mudagan ang ink sa tube if gamiton or empty ang cartridge-need na ipasuyop), ako ra gi reset(some power cord and power button combination) ni print rag balik. nidagan na pud ink sa tube.

note to ciss users : always keep the ink flowing, meaning gamita pirmi ang printer, even if just some random colored prints.

DMD. ako try later. sa office printer man gud ni nea nikalit ra. >.<

[werty]

DMD. ako try later. sa office printer man gud ni nea nikalit ra. >.<

unsay DMD? gisuway na nmog reset imo printer?

[enimavix]

unsay DMD? gisuway na nmog reset imo printer?

DMD means Di Ma Da! I tried everything.

[werty]

unsay paagi sa imo printer pag reset?

[janhenz1]

wla sad mi kasuway anang same sa imoha nga murag empty n gyud sa tube.
naalay portions here and there, mga 1 inch nga mga gaps, nga walay ink sa tube.

if naay discernible flow sa ink inig print
continue lang print until ma filled na sa ink ang tube and continuous na ang flow.

anyway, sa among Epson if naay laing problems like empty cartridge error and similar errors naay button



for all other problems including waste pad reset etc and also maintenance
naay gi-provide ang nag CISS nga Epson program



edit - naa man cguro after sales support nag imong gipalitan
if hasulan naka sa troubleshooting dad-a ngadto.

edit2 - hmm naa ma'y 2 ka injection (clean and unused) diri sa balay,
i've always wondered unsay plano nga gamitan ani ni Mrs.
basin para ni sa ink tube problems parehas sa imoha hehe

[enimavix]

wla sad mi kasuway anang same sa imoha nga murag empty n gyud sa tube.
naalay portions here and there, mga 1 inch nga mga gaps, nga walay ink sa tube.

if naay discernible flow sa ink inig print
continue lang print until ma filled na sa ink ang tube and continuous na ang flow.

anyway, sa among Epson if naay laing problems like empty cartridge error and similar errors naay button



for all other problems including waste pad reset etc and also maintenance
naay gi-provide ang nag CISS nga Epson program



edit - naa man cguro after sales support nag imong gipalitan
if hasulan naka sa troubleshooting dad-a ngadto.

edit2 - hmm naa ma'y 2 ka injection (clean and unused) diri sa balay,
i've always wondered unsay plano nga gamitan ani ni Mrs.
basin para ni sa ink tube problems parehas sa imoha hehe

noob man ko ani. no idea jud sa technicalities. but will try to do some experimentation. wa man ko kitag reset button ato man. >.<

[werty]

if naka ingon ka newbie ka ana butangan, then how come naka ingon ka "I tried everything."? daku ko ug salig na wala ni nimo gi printer reset or reset to factory defaults-which is sa canon is a combination of power button, and insertion sa power cord procedure.

anyways i rest my case on this. i mean u did everything, right?

[janhenz1]

noob man ko ani. no idea jud sa technicalities. but will try to do some experimentation. wa man ko kitag reset button ato man. >.<

tara suwayi ni iyang procedure,
murag lang ug niagi ug Google translate iyang English pero you'll get the gist

Blog of My Life: Why the CISS ink not flowing into the cartridge - sponge cartridge problem

How to Infuse Ink Flowing Canon Pixma iP2770


If the ink is in the air hose was inserted, mecha paper to the printing
process will be interrupted and the ink in the cartridges is reduced
until exhausted, so the printout will look no further because it ran out
of ink, so it needs refilling ink into action in the hose infusion once
discard existing air hose so that the whole area is really just filled
with ink without wind. Here's /*How to Drain / Fill Ink In Printer Ink
Infusion*/ to overcome gaps that exist in the infusion ink Canon Pixma
2770 printer that has been modified.

1. Turn on the printer
2. Click Start - Devices and Printers
3. Right click on the printer name
4. Click the Printing Preferences
5. Click the Maintenance tab (Maintenance)
6. Click the Cleanup Levels In, launched an oral spray that can not be
cleaned with regular cleaning
7. Select Black (Black), this is done only when the black ink are
experiencing a cold, black and color ink when trouble then select
All Colors BK, C, M, Y (A).
8. Click on Execute and click OK
9. Perform steps 6, 7 and 8 repeatedly until the ink sluruh part IV
actually been filled inks and no longer interrupted udarah therein.


Hopefully these tips can help the reader.

[enimavix]

if naka ingon ka newbie ka ana butangan, then how come naka ingon ka "I tried everything."? daku ko ug salig na wala ni nimo gi printer reset or reset to factory defaults-which is sa canon is a combination of power button, and insertion sa power cord procedure.

anyways i rest my case on this. i mean u did everything, right?

I tried everything that comes from the basic troubleshooting manual that came with it. Really?!

- - - Updated - - -

tara suwayi ni iyang procedure,
murag lang ug niagi ug Google translate iyang English pero you'll get the gist

Blog of My Life: Why the CISS ink not flowing into the cartridge - sponge cartridge problem

Thanks. But we're using MAC. Wala joi windows OS dri. Ang mga laptops sad kai MacBook.

[enimavix]

Mao ni iya error message everytime naa mi e print.