Fibre glass reinforced, 1 1/4" cut off wheels/disc for dremel/rotary tools 10pcs for 250php

[titaniumbox]

---

IR Pyroelectric Infrared IR PIR Motion Sensor Detector Module

Item Description:

• Product Type: HC--SR501 Body Sensor Module
• Operating voltage range: DC 4.5-20V
• Quiescent Current: <50uA
• Level output: High 3.3 V /Low 0V
• Trigger: L can not be repeated trigger/H can be repeated trigger(Default repeated trigger)
• Delay time: 5-200S(adjustable) the range is (0.xx second to tens of second)
• Block time: 2.5S(default)Can be made a range(0.xx to tens of seconds
• Board Dimensions: 32mm*24mm
• Angle Sensor: <100 ° cone angle
• Operation Temp: -15-+70 degrees
• Lens size sensor: Diameter:23mm(Default)

Features:
1. The automatic sensor: to enter the sensor output range is high, people leave the sensor range of the automatic delay off high, output low.
2. The photosensitive control (optional, factory is not set) may set the photosensitive control during the day or light intensity without induction.
3. The temperature compensation (optional, factory is not set): In the summer when the ambient temperature rises to 30 ~ 32 ℃, slightly shorter detection range, temperature compensation can be used as a performance compensation.
4. Two trigger mode: (can be selected by jumpers)
a. Can not repeat the trigger: the sensor output high, the delay time is over, the output will automatically become low from high;
b. Repeatable trigger: the sensor output high after the delay period, if the human body in its sensing range activities, its output will remain high until after the delay will be left high to low (sensor module review .Measured activities of each body will be automatically extended after a delay time, and the final event of the delay time Starting point of time).
5. With induction blocking time (the default setting: 2.5S block time): sensor module, after each sensor output (high change Into a low level),you can set up a blockade followed by time period, in this time period the sensor does not accept any sensor signal. This feature can have a "sensor output time" and "blocking time" the interval between the work produced can be applied to detect the interval Products; also inhibit this function during load switching for a variety of interference. (This time can be set at zero seconds - Tens of seconds).
6. The working voltage range: the default voltage DC4.5V-20V.
7. Micro-power consumption: static current "50 microamps, especially for battery-powered automatic control products.
8. The output high level signals: types of circuits can be easily and docking.

Spoiler! 

[titaniumbox]

Ultrasonic Sensor Module Distance Measuring Sensor for Arduino

Main technical parameters:

• Voltage: DC 5V
• Static current: less than 2mA
• Electrical level output: 5V high
• Electrical level output: at the end of 0V
• Induction angle: not more than 15 degrees
• Detection distance: 2cm-450cm
• High precision: 2mm

Wiring: VCC, trig (control side), echo (receiving end), GND

3 Module works:
(1) Using IO trigger distance, the high signal to at least 10us;
(2) Module automatically sends eight 40khz square wave, automatically detects whether a signal return;
(3) A signal back, through the IO output a high electrical level, high electrical level duration is: the ultrasound time from launch to return. Test distance = (time of the high electrical level * speed of sound (340M / S)) / 2;

Package Content:
HC-SR501 Ultrasonic Sensor Module

Spoiler! 

[titaniumbox]

315Mhz RF Tx/RX Transmitter and receiver link kit for Arduino/ARM/MCU remote

TX Technical Specifications:
A． Working voltage: 3V～12V
B． Working current: max≤40mA (12V), min≤9mA(3V)
C． Resonance mode: sound wave resonance (SAW)
D． Modulation mode: ASK /OOK
E． Working frequency: 315MHz-433.92MHz, customized frequency is available.
F． Transmission power: 25mW (315MHz at 12V)
G． Frequency error: +150kHz (max)
H． Velocity: ≤10Kbps
I． Self-owned codes: negative

RX Technical Specifications:
A． Working voltage: 5.0VDC +0.5V
B． Working current:≤5.5mA (5.0VDC)
C． Working principle: single chip super regeneration receiving
D． Working method: OOK/ASK
E． Working frequency: 315MHz-433.92MHz, customized frequency is available.
F． Bandwidth: 2MHz (315MHz, having result from testing at lowing the sensitivity 3dBm)
G． Sensitivity: excel –100dBm (50Ω)
H． Transmitting velocity: <9.6Kbps (at 315MHz and -95dBm)

Spoiler! 

[titaniumbox]

Mini 3 in 1 PCI-E LPC PC Laptop Analyzer Tester Diagnostic POST Test Debug Card @ 450.00php

Features:

• LED displays shows diagnosis result of motherboard.
• Used for processing Mini PCI, Mini PCI E, LPC signal.
• This is used to display the Error-code and RST/CLK signals.
• It is your ideal and useful tool for notebook repairing partner.
• This card is easy to use for end users and it works with high stability.
• Intelligent analysis of the code corresponding to the cause of the malfunction, and gives diagnostic program.
• Great for IT enthusiasts and engineers to test and repair computer .
• It can diagnosis the motherboard signal which show the problem of CPU, memory, display card, etc
• Error code table offered makes you know the error details easily.
• Hexadecimal character display.

Specifications:

• Material: Plastic/Metal
• Dimensions: 5 x 3 x 1 cm
• Net weight: 12g
• Package weight: 21g

Spoiler! 

[titaniumbox]

PCI/ISA Diagnostic 4-Digit PC Analyzer Debug POST Card Tester@ 525.00php

Features:

• Used to test motherboard problems.
• 8 LEDs indication, easy to read LED Display on the Display, LED displays shows diagnosis result of motherboard. Especially helpful to pinpoint where is the problem when power on the computer and find no display or machine hangs up.
• Diagnosis the motherboard signal which show the problem of CPU, Memory, video card, etc
• The POST code display is made up of a dual, dot matrix hexadecimal read-out that display's Power On Self Test (POST) status codes.
• Support the power source working indicator -- +5V,+12V,+3.3V and 12V(When indicator LED is on to indicate its respective power is fine, otherwise to indicate its respective power is failure.)
• Fully compatible with any kind motherboards which has the PCI and ISA bus slot
• Self checking remote display function.
• Dual POST code display - User can readout the POST at PCB component and solder side. It is easy to view the POST code when user plugs the POST card in computer system.
• Recall previous post codes at the touch of a button.
• Drastically reduce troubleshooting time.
• Quick and easy to install into an open PCI or ISA slot of PC motherboard.

Package Included:

• PC Analyzer card * 1
• Signal cable * 1

Spoiler! 

[titaniumbox]

4 Bit/Digit Laptop USB Mini PCI LPT Analyzer Tester POST Debug Card @ 625.00php

Features:

• Brand new and high quality.
• LPT port 4 digit diagnostic card for Desk pc and notebook.
• USB provide power supply.
• The value of four-bit-code PC Analyzer's "initiative code" is specified and it is "0000" or "FFFF". "initiative code" is clear at a glance. While the value of conventional two-bit-code PC Analyzer's "initiative code" is uncertain and man is unable to distinguish accurately by unaided eye.
• Court defects by difference sounds coding with build-in speaker.
• It can diagnosis the motherboard signal which show the problem of CPU, Memory, display card and so on.
• You can thumb through the codes that has gone. If you press the switch the code pause, if you press the switch again, the code continue.
• Size: 7.0cm x 8.0cm x 2.0cm.

Package Included:

• 1 x 4-Digit Laptop PC Analyzer
• 1 x USB Cable
• 1 x User Manual

Spoiler! 

[titaniumbox]

LCD PCI PC Computer Analyzer Tester Diagnostic POST Debug Card@ 800.00php
((((((SOLD OUT))))))
Features:

• Brand new and high quality.
• LCD display shows error code, reason & solution on screen.
• No need error code book. Much more inconvenience than LED hexadecimal character display.
• Super mini design.
• PCI interface for easy access to your desktop PC.
• Ideal for IT enthusiasts and engineers to test and repair computer.
• Inserts into PCI slot and sets correct BIOS by BIOS button before booting.
• Displays error code, reason and solution quickly after booting, if there is a problem.
• Supports AMI, Award & Phoenix.
• BIOS button for setting correct BIOS and PAGE button for viewing records.
• CLK, SYS, +12, -12, +5V, +3.3V indicators available.
• Dimension: 7.4cm x 6.3cm.

Package Included:

• 1 x LCD Display PC Analyzer
• 1 x User Manual

Spoiler! 

[titaniumbox]

PC LCD 20/24 Pin PSU ATX SATA HDD PSU Power Supply Tester @ 950.00php

Features:

• The SD power supply tester is a robust voltage, tester for PC-power supply, ATX . BTX and ITX compliant, power supplies can be tested. LCD's indicate the status of voltage .The PC / SPS is suitable for the ambitious hobby user, as well as for a quick functional check in specialized trade.
• Plug power supply 24 PIN and P4 , P6 or P8 into the corresponding jack of the power test suite.
• Power on the supply of power, will hear "DuDu" ring , if no flicker then the power supply output voltage is normal.
• If a certain voltage signal was not detected, or the detected voltage value over the normal, will issue a "DuDu" long buzzer ; if the corresponding voltage value or PG flicker too, then the power is failed.
• Voltage source : 20/24 pin ( ATX - connector ).
• Voltage test : +12V , -12V , +5V , -5V , +3.3V , +5V Stand by (SB) 12V power Good ( PG ).
• Connectors : Floppy, HDD , CDROM , SATA , 4pin ( P4 ) , 8pin ( Dual-CPU ) , 6pin ( PCI-Express ).

Package:

• 1 x LCD Power Supply Tester

Spoiler! 

[titaniumbox]

Posting some snapshot of happy buyers of my items. This are also members in other sites. There's a lot who bought who never gave feedback as they are not members of any forums or message boards.

Spoiler! 

Just guess what forum or message boards are those from.. hehe.. I'm practically everywhere

[lowel]

Thanks bro....