Try nya gamit ug working rams bro. Manually configure settings on loose timings, ddr1066 and +.1v vdimm, +1 power level sa NB voltage then save. Boot, shutdown then replace rams with the 1 PQI module. It should boot. Now shutdown then insert the second module then reboot and revert to mga giusab nga setting one at a time once every reboot. You should be able to isolate which setting is causing boot error.

Mao na ako workaround for ram incompatibility. Problem with this method is you have to always have backup rams in case you need to reset bios. So its a big hassle if overclocker ka.

@TS, this may or may not work in your case. Either way, you should have that EMAXX replaced..