Ask ko'g inputs for OC (for a gaming rig only)... i5 "K" CPUs

[werty]

unya na pag kuri2 sa voltage. kuhaa sa max freq sa procie. kung unstable dha na kuri2 sa voltage. kung problema sa temp, it meand need better cooler, dili undervolt solbad >.< so far stable ka at 4.6Ghz, do something sa temp though before proceeding

[lloyd_joy]

hhaaayyy... managed to OC'ed @ 4.8 GHz... run Prime95 for almost 2 hrs. its stable but max temp is at 87Deg C... paets...





noted bro werty... thanks.. next time napud kay duka na gyud... hehehehe

[dlareG]

hapit na ang 5GHZ boss lloyd, cooler nalang and your good! gratz!!!

[werty]

1.5v naman na boss. Kuyaw naman nas sudden death syndrome...

[lloyd_joy]

mao gyud bro... taas na ang voltage nya...

kani, @ 4.6 GHz, set the multiplier to 46 then made some voltage tweaking... then run Prime95 for 7 hrs+... the rig is stable... "newbie" on the works... hehehe... but taas lang gihapon ang voltage & temps... hhhaaayyyy...

[werty]

try if ma lower pa imo voltage. to speed things up, d man necessary na 2-3hrs burn-in every change. run it like 20-30mins or so if its stable, then adjust again, burn-in if stable adjust again.. repeat until ni error.. dha na pag burn-in ug dugay if satisfied na ka sa settings.

just a note, naa may nag 2550K pud @ 4.7 @ 1.275 volts but using just Hyper 212 d man kaabot 70 iya temps.

UPDATE
sorry, he set it at 4.6GHz diay, 1.275 volts for 24/7 usage.

[Sempron Guy]

gamiti ug intel burn test kay mas dali, set it to maximum at least 20 loops mga usa ka oras ra siguro na nga testing. Ok ra nang 1.5v as long as temps below 90c. Diri na mugawas ang need for better TIM and high speed fan

[lloyd_joy]

thanks for the input bros werty & sempron... lingaw pud ni'ng mag OC2x dah... hehehe...

mura'g bati man ang stock fan sa Antec... saba pud ang extreme setting... mag hunat2x ang fan ug tuyok... init lang gyud siguro pud kaayo ang CPU...

ah, mao ni ang challenge sa OC'ing...

[werty]

uu, temperature jud kontra nmo anang overclock. tjmax daw is 98deg, so sakto si sempron anything below 90 is good, below 80 better, below 70 best haha. take care pud voltage. intel states max voltage at 1.52 but doesnt specify it to be safe. mga 1.45 siguro worst case.

[4s gadgets]

nindot jud d i ning mag OC ue, wew if ma set-up to akong A8-5600k try pud nko OC and ask lang ko sa inyo advice... naa d i ko ask ig mag OC ba ang core speed ang mutaas? o kanang nka display kilid sa intel i5 @ 3.40ghz? at boss @lloyd_joy asa imo gi mean nga "you managed to OC'ed to 2.8ghz" sir?