0x00000019

[butitoy]

its an error on the OS installation as it writes the program on the HDD

it can be :

gubaon nga DVD reader ; solution > use USB based win7 ultimate | simple creation > on win7 machine > at least 8GB USB + powerIso 5.1 > install PowerIso , make it registered > ryt click, run as admin > create bootable usb.


bad sata cable ; kasuway nko kadaghan > use new sata cable, ayaw sa lukuta or roll

bad sata power adapter ( molex to sata ) > ilis...careful with this one..loose molex to sata can kill hdd. or burn ur pc.

bad HDD header ; re partition or do not create partition at all aron ma test nimo if naa ba gyud blema ang HDD

make sure the HDD is sentinel 100 / 100

if dili, ilis hdd

[siegfreid]

tried inverting sata cables and use new cables, I even tried inserting to different sata ports on the board, using different HDD's and installers. it wont install a fresh copy... kutob ra gyud sya "windows loading files" then displays the logo for a moment, freezes and blue screen.. a code 0x0000000A displays...

[butitoy]

hikapa ang north bridge sa board bro

basin init ra kaayo

[madmike]

hi sir, ako man owner ani nga board. wala ko naka reply sa text nimo sir sensya kaayo naputlan akong sun. hehe

500gb nga SATA II akong gamit ani before sir, and 2GB 1066 nga OCZ ram.

I hope mapa gamit pa nako ang same hardware nga original kuyog sa board og proc but nahalin nasad sir along with the case.

Observe2x lang ko sa mga tips sa experts nato dire bro, coz to be honest wala sad ko ma sweto sa blue screens, i tried it though nag install ko nya bati nga CD dili gyud mo tiwas og install.

Rest assured, wala problema ang board and processor. il reply once ma restore nani akong sun bro, bag.o rako kabayad nya giputlan ko gud..

please test another HDD sir, or ilaha tips, because if dili ka mo install og OS, dra man ma test stable ba ang board og proc. blue screen error kay software side naman na sir.

subscribe lang sad ko sa imong thread.

[siegfreid]

hi sir, ako man owner ani nga board. wala ko naka reply sa text nimo sir sensya kaayo naputlan akong sun. hehe

500gb nga SATA II akong gamit ani before sir, and 2GB 1066 nga OCZ ram.

I hope mapa gamit pa nako ang same hardware nga original kuyog sa board og proc but nahalin nasad sir along with the case.

Observe2x lang ko sa mga tips sa experts nato dire bro, coz to be honest wala sad ko ma sweto sa blue screens, i tried it though nag install ko nya bati nga CD dili gyud mo tiwas og install.

Rest assured, wala problema ang board and processor. il reply once ma restore nani akong sun bro, bag.o rako kabayad nya giputlan ko gud..

please test another HDD sir, or ilaha tips, because if dili ka mo install og OS, dra man ma test stable ba ang board og proc. blue screen error kay software side naman na sir.

subscribe lang sad ko sa imong thread.

dili kaha ni sa board nimu sir bad bios?dili man gud ta expert ani... tried several types of windows installers and same error occurs, code 0x0000000A, 0x0000007e, 0x000000c5 and etc ...

[madmike]

dili man sir kay 5 mins ka bag.o na abot mao gyud pang tang2x sa parts gikan tan.aw og salida sa youtube, witness pa to akong officemate nga naa sa balay kay siya ang nipalit sa HDD.

and dili ko anang bios update sir, dili ko kabalo ana, original pana since purchased ang bios, hehe you dont need bios update sad if theres nothing wrong with the board compatibility sa parts. try an external dvd rom bro, kanang usb, if mo go though ba.

ive summed up ilang mga suggestions (from the one's with good knowledge about this stuff) either bad HDD, bad sata cable, or bad optical drive..

[siegfreid]

dili man sir kay 5 mins ka bag.o na abot mao gyud pang tang2x sa parts gikan tan.aw og salida sa youtube, witness pa to akong officemate nga naa sa balay kay siya ang nipalit sa HDD.

and dili ko anang bios update sir, dili ko kabalo ana, original pana since purchased ang bios, hehe you dont need bios update sad if theres nothing wrong with the board compatibility sa parts. try an external dvd rom bro, kanang usb, if mo go though ba.

ive summed up ilang mga suggestions (from the one's with good knowledge about this stuff) either bad HDD, bad sata cable, or bad optical drive..

I tried everything sir, tried three different WD HDD and an SSD, different Rams, changing bios setting, different sata cables and different OS installers, same results but different codes ang display. cant install a fresh copy. aku lng ni ipa try diagnose sa work nku tomorrow if unsa gyud ni problem sa board nganu cge balik balik blue screen

[domzgnrlover86]

question lang nako TS. sa pag try nimog different installers, DVD rajud imung na try or ning try pd ka atong bootable USB?

[siegfreid]

question lang nako TS. sa pag try nimog different installers, DVD rajud imung na try or ning try pd ka atong bootable USB?

try lng naku today basin mu work, murag kani nlng gyud wala naku ma try

[domzgnrlover86]

try lng naku today basin mu work, murag kani nlng gyud wala naku ma try

hahaha sulayi jud, kay paminaw pod nako basin aduna pd kay faulty DVD-ROM mao tingaling same error imung makuha sa pag try nimog different installers