question about thermal paste na nag kampat pagapply

[butitoy]

---

hhmmm....... ang uban, ilang e recommend nga pang tang tang sa thermal paste kay isoprophyl alcohol kay dali ra ma uga, ang ethyl etc kay medjo oily, dugay mu uga. I used iso alcohol in removing my thermal paste before whenever I change it. ang thermal paste bisag ni gahi na, ma tang tang ra na sa sige ug rub rub hinay hinay, madugay mma hilis ra sya ug hinay hinay. well, as long as wala na abot sa pin connectors ang paste, then it's safe, as long as naa ra sa upper part, oks ra na.

isopropyl alcohol are oil based and almost as same as but weaker than lacquer thinner.

with lacquer thinner, u just need a softbrush.

[frostbit3]

unsa nga thermal paste na? most thermal paste karon is non-conductive

cooler master sir, katong puti gani

[kidlovejeayanne]

Ang imo lang jd Likayan TS noh nga dili nimo maapil ug hilabot ang bottom part sa PROC. Careful lang jd