help corair vengeance 1866 4x2gb

[kel2985]

---

b4 I am using 1600 gskill 2x2gb nga ram.
and now corsair vengeance 1866 4x2gb.

ang problema inig set nako sa multiplier sa ram to x18.66
mag overclocking failure ang computer.
then gi set nako galik og x16 ang multiplier, ok ra.

for now ga 1600 rako sa akong corsair vengeance 1866 4x2gb.

unsaon para mo run sya to 1866.

thanks

[vanz_paltog]

sa bios boss... bag.o lng ko nag.usab dri... kai 1600 man unta speed sa ako RAM ... nia nka.AUTO to 1333 ra mn d i.. mao ako g.usab... sa bios ra jd nako g.usab boss.. mao pd ako na.research

[LadYKilleR8520]

Sir palermo!! ahaha.. John Enad ni sir.. please indicate motherboard model, need namo ang chipsetanah sir, 1336 X58 nah nga mobo sir? sa sandy and Ivy bridge kay no need nah man ang pag.set sa memory multiplier.. please indicate motherboard model , different architectures require different ways in overclocking..and please also indicate processor model..thanks sir

[kel2985]

gigabyte z68ma-d2h-b3
intel 2500k
ram CMZ8GX3M2A1866C9.

gi research jud ko ni for 8hrs.
nakit.an rajud nako ang fix.

sakatong naka problema sa ako.a:

just change the ram timing value standard and advance mode.
9-10-9-27
Command Mode 2
Row Cycle Time 48
READ to PRE Time 7
RAS# to RAS# Delay 7
WRITE to READ Delay 7
WRITE Recovery Time 14 DRAM Clock
FOUR ACT WIN Time 36
REF Cycle Time 160ns

[LadYKilleR8520]

if possible better use nlang the XMP profile sir, your ram supports an XMP profile, this is much stable than overclocking your ram to tighter timings.. IT will work, but when you load test the ram, dli nah cya stable.. set your MOBO to XMP profile and set the Ram to their XMP settings

[kel2985]

sam ra gihapon kong xmp enable.
i.tweak jud ang standard and advance timing para mo function siya as 1866.

pero dili tanang board tingali kihanglan i tweak.

kaning pariho sa ako nga low end ra.