Canadian Welding Bureau

[wowielzoie]

ZOIE Skills Training and Assessment Center is now officially a CWB Certified Welding Test Centre.


ZOIE also has the same CWB TRAINING MANUAL like what SKILLS use. This was given to us by one of the graduate of SKILLS. This is also to inform you that SKILLS is still NOT recognized as a Welding Test Centre by the Canadian Welding Bureau. This information was given to us by the CWB representative that came to accredit our training center.

[JonesManaban]

ZOIE Skills Training and Assessment Center is now officially a CWB Certified Welding Test Centre.


ZOIE also has the same CWB TRAINING MANUAL like what SKILLS use. This was given to us by one of the graduate of SKILLS. This is also to inform you that SKILLS is still NOT recognized as a Welding Test Centre by the Canadian Welding Bureau. This information was given to us by the CWB representative that came to accredit our training center.

Pasabot nimo bai nangilad diay ni si consul lee o ang ambassador ba kha? Si consul rba tawn nangusog ug back up aning CWB sa skills. Matud pa sa skills pud peke man daw ang CWB sa bmc ug zoie. Asa may sakto ninyo?

Peke or true, ang importante ani kinsay makatabang gyud sa graduates. Sa welding graduates this year pacanada, ang BMC duna nay walo, ang SKILLS zero pa, pila man sa Zoie? Ang nakabati man gud aning mga welding skuls, maayo ra sa pagrecruit ug sales talk pero inig graduate pasagdan nman kuno ka. Pasikati mi unsay pamaagi sa zoie.

[Scott Bernard]

Luoya sa mga new trainees sa Skills nga walay basa2x ani ng thread.

[Mayce]

our school

THe first and original

BMC = quality training just visit us you will see the difference

our welding Curriculum is far more advance than CWB welding CSA W47.1

CSA W47.1 is just basic over rated hype

even our security guard could perform that no offense


funny thing from that 2nd rate Zugi copycat school bragging about their
newly CWB accredition center is total nonsense.All of those school's so called ungratefull instructors
came from BMC you can even view their test specimen in here.just dont laugh.


as of now there are already three testing centers which are accredited by CWB here in cebu
but you see CWB wont alone let you work in canada.Even Mr. lee approach this school for possible partnership with cwb but at that time BMC is already in the process
of accreditation with cwb.So maybe he went to skills

the truth is if you want to work abroad just a friendly advice especially in canada,europe,usa,australia,new zealand
you need to have a confident welding skill in performing a 6g carbon steel pipe in front of a prospective employer all those certificates will go to garbage if you cant, a 3g plate is insufficient.
2nd you need experience two or three years will give you the necessary training and confidence.3rd you need to have some money finding work directly from companies on said countries
are extremely difficult chances are you will go thru an agency who will assist you and finding a legitimate one is also difficult. you can go to middle east if your really on a budget.

so fyi and unbiase one if you think by just going to school will let you immedietly go to said countries is false.

even our schoolmates who have just gone to canada had rock solid years experience 2 to 3 years
in shipping yards and fabrication companies.They can weld a plate or pipe with confidence.

SKills is still new in the welding world and very expensive fair

Zoie enough said fair

Don Bosco Technology Center fair


BMC original old timer fair

St. James Academy of Skills budget
Cebu Science of Welding Skills and Technology, Inc. Budget

Benedicto College, Inc. budget

[ixxo]

^ sakto! sa imong jud SKILLS and ABILITIES magdaog, dili kung kinsang demonyoha nagpasalig nimo og shortcut2x

[JonesManaban]

Wow bmc vs zoie. Andamon nato ang popcorn! Ak ak

Ang concern siguro sa mga people dyud ngari asa ta nga skul makasave nga dli pud masacrifice ang quality, ug asa nga skul makatabang ug palarga o maskin local employment lang pang experience. Dli man siguro na question ang paningkamot kay sa kadaku sa kwarta involve magtinarung man dyud siguro ka.

[JonesManaban]

[IMG]
the truth is if you want to work abroad just a friendly advice especially in canada,europe,usa,australia,new zealand
you need to have a confident welding skill in performing a 6g carbon steel pipe in front of a prospective employer all those certificates will go to garbage if you cant, a 3g plate is insufficient.
2nd you need experience two or three years will give you the necessary training and confidence.3rd you need to have some money finding work directly from companies on said countries
are extremely difficult chances are you will go thru an agency who will assist you and finding a legitimate one is also difficult. you can go to middle east if your really on a budget.

so fyi and unbiase one if you think by just going to school will let you immedietly go to said countries is false.

even our schoolmates who have just gone to canada had rock solid years experience 2 to 3 years
in shipping yards and fabrication companies.They can weld a plate or pipe with confidence.

Mao ni sakto prangka ba. Naa man gud uban skul mupromise dayon ug langit pati kabitoonan, wa pa gani ta kasugod.

[leopoldomautganon]

Hello! 1st batch graduate here!

[Rakizta]

mao ni diskarte ani mga training centers lagi . ang ila main nga criteria ani is maka pangwarta sila tawn sa mga enrollees nila

[JonesManaban]

Hello! 1st batch graduate here!

bai mautganon (ataya ug ngan ak ak), kabasa man ko imo mga post sa career center. Ngano mangapply man ka ug call center, dli diay nimo barugan imo pagka batch 1 sa skills? Pagkasayang sa imo tuition, pangita nlang work exp sa welding sa ug dli pman gani kalarga pa.