Tanan Ubuntu users...

[vi3wts!ck]

---

I've done everything perfectly, result.....same temp, ni bug akong brightness control, not sure ko ha could be after sa 3.9.0 upgrade. pero minor issue rana.

Starting temp after boot is 56 degrees, kung nay process 60 - 65 degrees and currently holding at 65 degrees. Nalimot ko, akong processor is AMD E2 1.7ghz L2 APU. Well... probably this is normal with AMD E series processors. Gi check nako ang fan, 100% working and temperature sa bottom is ok raman pud based on my experience not as hot as HP DV6000.

[noy.juan]

wala mag haguros ang fan? mine is intel i5 with hybrid gpu intel/ati switch graphics.... and mac mini with mac osx 10.4 intel dual core 4gig ram virtual box with minimum memory set

[vi3wts!ck]

wala man pud nag haguros. so far so good.

[vi3wts!ck]

i dont know if it is applicable to you but i also encountered temperature and high cpu utilization on my lappy with 12.10 Ubuntu.

solution: disable flash player on my browser.

somehow my lappy cant keep up with all those flashy things happening in every page i visit. more flash running = high cpu utilization = heat

in my case, since gi check nako ang processes via top, flash-plugin is 1.7% ra.

mga bro, based in your experiences, asay nindot gamiton nga distro pang slow netbooks. Xubuntu or Lubuntu?

[Devian]

Sorry but havent tried those versions yet.

Maayo na inyo laptop kay i3-i5 na...ako tawon kadto mga t2500 pa. plus i usually kept open around 20tabs. hehe

[noy.juan]

in my case, since gi check nako ang processes via top, flash-plugin is 1.7% ra.

mga bro, based in your experiences, asay nindot gamiton nga distro pang slow netbooks. Xubuntu or Lubuntu?

i havent tried lubuntu so catn comment on it, but xubuntu yes. since it uses lightweight xfce

if mag view man gani ug flashvideo better use google chrome since it has its own built-in stable flash player.... have you guys set you distro to use all core sa cpu?

[vi3wts!ck]

mga bro, naa lang ko pangutana. akong gi dmidecode akong system and I found out this.

Memory Device
Array Handle: 0x002C
Error Information Handle: Not Provided
Total Width: 64 bits
Data Width: 64 bits
Size: 2048 MB
Form Factor: SODIMM
Set: None
Locator: DIMM 0
Bank Locator: CHANNEL A
Type: DDR3
Type Detail: Synchronous Unbuffered (Unregistered)
Speed: 1333 MHz
Manufacturer: A1_AssetTagNum0
Serial Number: 00000000
Asset Tag: Not Specified
Part Number: Not Specified
Rank: 1
Configured Clock Speed: 667 MHz

Is there a significant increase in memory performance by setting the configured clock speed to 1333mhz? Problema nako is walay setting sa akong bios nga ma configure and clock speed. Sa akong pc naa, pero sa notebook wala.

[noy.juan]

mga bro, naa lang ko pangutana. akong gi dmidecode akong system and I found out this.

Memory Device
Array Handle: 0x002C
Error Information Handle: Not Provided
Total Width: 64 bits
Data Width: 64 bits
Size: 2048 MB
Form Factor: SODIMM
Set: None
Locator: DIMM 0
Bank Locator: CHANNEL A
Type: DDR3
Type Detail: Synchronous Unbuffered (Unregistered)
Speed: 1333 MHz
Manufacturer: A1_AssetTagNum0
Serial Number: 00000000
Asset Tag: Not Specified
Part Number: Not Specified
Rank: 1
Configured Clock Speed: 667 MHz

Is there a significant increase in memory performance by setting the configured clock speed to 1333mhz? Problema nako is walay setting sa akong bios nga ma configure and clock speed. Sa akong pc naa, pero sa notebook wala.

not really much of an OCer(ish) but i havent heard any linux distro been used in OC...



i have 3 netbook here in the house sport M$ sh!t...

now continue im watching over this thread more... na interest man noon ko aning OC...

[vi3wts!ck]

ngek! na mis interpret nako ang data. hehehe.

here's what I've found from this link TR Forums • View topic - Doubt on Memory speed.

DDR3-800 (PC3-6400) = 400MHz
DDR3-1066 (PC3-8500) = 533MHz
DDR3-1333 (PC3-10600) = 667MHz
DDR3-1600 (PC3-12800) = 800MHz
DDR3-1866 (PC3-14900) = 933MHz
DDR3-2133 (PC3-17000) = 1067MHz

Surely, I'm already satisfied with the file system in my Xubuntu now. It's running smoothly. No further experimentation...

I just found out that the traditional /etc/init.d/networking is causing the crash everytime mag ssh reboot, instead "service networking-manager restart" is working perfectly.

[noy.juan]

I just found out that the traditional /etc/init.d/networking is causing the crash everytime mag ssh reboot, instead "service networking-manager restart" is working perfectly.

is this on 13.04? if it does its bug sa kernel i dont use "service networking-manager restart" i just pulled the cable out and plugged it again... and walla network issue solve... and i alway use sudo reboot over ssh since when im the office my laptop is my server i and i use my mac most of the time... so far wala ko issue except lang if nag update ko sa grub ug fstab