Liquid CPU Cooler for i5 proc

[jan_michael]

---

na ka palit man jud koh ganiha antec kuhler H20 620 Liquid from pcx well im not happy result of cpu temp decrease a little bit from before 68C now 57C at full laod wtf. cguro maybe thermal paste i think problemo i used my old thermal paste zalman AT

zalman!! TS Maayo pa ana Colgate,Close up,Beam,Pepsodent

[lloyd_joy]

na ka palit man jud koh ganiha antec kuhler H20 620 Liquid from pcx well im not happy result of cpu temp decrease a little bit from before 68C now 57C at full laod wtf. cguro maybe thermal paste i think problemo i used my old thermal paste zalman AT

add another fan bro and convert it to a "Push-Pull" set-up... allow me to share my review on my Corsair H50... the same class ni sila sa imohang ANtec Khuler H2O 620... had added a dual Corsair SP120 (2,350 rpm) fans and converted it to a "Push-Pull" system... the temps are nice...

https://www.istorya.net/forums/comput...l#post13954749

[FredieMercury]

add another fan bro and convert it to a "Push-Pull" set-up... allow me to share my review on my Corsair H50... the same class ni sila sa imohang ANtec Khuler H2O 620... had added a dual Corsair SP120 (2,350 rpm) fans and converted it to a "Push-Pull" system... the temps are nice...

https://www.istorya.net/forums/comput...l#post13954749

i like that hmmm. sadly to say ubos budget bosing to be continue na lang nxt 3months haha.

[FredieMercury]

zalman!! TS Maayo pa ana Colgate,Close up,Beam,Pepsodent

used toothpaste for test purpose only . are u lost your marbles what ru thinking ma dry jud sya maybe days or week kahibaw cguro ka what happen if ma dry thermal paste(disaster).

[senpai91]

na ka palit man jud koh ganiha antec kuhler H20 620 Liquid from pcx well im not happy result of cpu temp decrease from before 68C now 57C at full load wtf. cguro maybe thermal paste i think problemo i used my old thermal paste zalman AT

e reseat kuno balik ang imong cpu block basin di lang maa pagka apply sa thermal compound? gi unsa nimo pang apply? pea method or spread? sa thermal compound kay less is more not more is more but too less lisud sad na.

- - - Updated - - -

add another fan bro and convert it to a "Push-Pull" set-up... allow me to share my review on my Corsair H50... the same class ni sila sa imohang ANtec Khuler H2O 620... had added a dual Corsair SP120 (2,350 rpm) fans and converted it to a "Push-Pull" system... the temps are nice...

https://www.istorya.net/forums/comput...l#post13954749

ang akong set up karon kau pull config ang hyper 212 evo pero same temp raman gihapon theres no difference sa ilang temp sa push pull config

[lloyd_joy]

i like that hmmm. sadly to say ubos budget bosing to be continue na lang nxt 3months haha.

pwede ra ka gamit ug 120 mm fans na taas ug RPM bro... "no need to use fancy or expensive ones"... ang importante, ma dali ug pa bugnaw ang rad kay para mo bugnaw nang coolant inside...

use a fan w/ a 1,600+ RPM or greater... or buy a fan that has the same RPM on the stock Antec fan... try ug fan hunting dha para maka spank ka'g pares ana... for the installation, you can use 2 mounting screws (the stock screws) per fan. i diagonal lang ug position. that is what i did on my set up...

[lloyd_joy]

ang akong set up karon kau pull config ang hyper 212 evo pero same temp raman gihapon theres no difference sa ilang temp sa push pull config

dili pareho ug result ang air cooling system and a hydro cooling system bro... mas maka benefit ang hydro system on a "Push-Pull" set-up kay dali nya ma pabugnaw ang coolant inside the rad. mao mana ang mag sige'g cycle para mo pa bugnaw sa CPU. naa'y limit na ma-max dessipate ang rad for an air cooled system... mao na sa imohang na observed, the same lang ang result sa hyper 212 evo system nimo on a single and a dual fan configuration...

for any Open and Closed LCS, mo matter gyud ang number of fans and radiator sizes... the bigger and/or thicker the rad(s) and the faster the RPM of the 2 fan (higher air flow is included) in the Push-Pull configuration, the better it is in dessipating heat from the source if compared to a thinner rad(s) with slower RPM fan(s) w/ lower air flow... granting that the other components in the cooling system remains exactly the same...

[archt_vin]

TS, if ganahan ka na mo decrease na imo temps go with custom LCS, better spend big bucks para gyud ma satisfy ka aning temp issues.

IMHO, d na man sad gud na mo matter gyud ang high temps, esp ga dula gud ka, mo taas gyud na hasta ang VC temps...

d ka malingaw ana if cge lang ka bantay sa imo stats...

[senpai91]

^kung Open LCS nindot mag sugod sa larkooler around 5k man guro. kaysa adto kay sa mga big guns mag sugod.

[FredieMercury]

e reseat kuno balik ang imong cpu block basin di lang maa pagka apply sa thermal compound? gi unsa nimo pang apply? pea method or spread? sa thermal compound kay less is more not more is more but too less lisud sad na.

- - - Updated - - -


thanks a lot bro ok na 45C problemu solve.