New DDR3 World Record

[keropi]

if ana ra nga voltage then liquid nitro is overkill, DDR3 modules can take as much as 2v on passive cooling I'm guessing this is around 2.5

The LN2 was more likely for the 151mhz bclock (x14). If im not mistaken, ddr3 (or 32nm ram and below) dont scale well with high voltage unlike ddr2 and anything above 2.2v is a death sentence for ddr3 even with dry ice.

Below 2v is just my assumption though. Come to think of it, you might be right..


Add:

^^ Hala! Wala ko kahuna-huna da.. Ma-OC diay ang bclock sa Haswell ug ing-ana kataas.. Woot!!

[bim27142]

Ma-OC diay ang bclock sa Haswell ug ing-ana kataas.. Woot!!

kaning bclock mao ba ni "fsb" sa karaang panahon nga pag OC?

anyhow, if i remember correctly napa abot nakog 300mhz akong athlon64 3200+ sa una... i'll have to double check unya sa akong mga archived screenshots... but anyway, this is not a fair comparison sa haswell though... but it's just good to remember the good old fashion way of overclocking...

[keropi]

kaning bclock mao ba ni "fsb" sa karaang panahon nga pag OC?

anyhow, if i remember correctly napa abot nakog 300mhz akong athlon64 3200+ sa una... i'll have to double check unya sa akong mga archived screenshots... but anyway, this is not a fair comparison sa haswell though... but it's just good to remember the good old fashion way of overclocking...

Mura ingana bro. Difference lang kay quad-pumped to sila sa una. IE: 1066fsb = 4 x 266mhz.
Starting Bloomfield, base clock na lang. Dili na quad-pumped fsb. 133bclk x 20 for i7-920. For Sandy and ivy, 100mhz na.

Edit: Dili diay ko sure sa Athlon XP kung 200mhz ba to or 166 or 133