Intel Core i7-3770 (3.4G) 8mb 22nm BUILD

[werty]

nanghadlok ra to s newegg aron mupalit kag lain na rams---hehehe...

anyways seldom ra kaayo ko makadungog anang incompatible rams(unless siguro sa mga super performance-mode setups and tight timings?). but if ato tumanon ang suggestion sa newegg, mas daku chance na mag ka problema ka if tagsa-tagsaon nmo palit ang rams. 2xdual-kit (or quad-kit if u can find one) will be a safer option/

[dwarfy]

thanks boss werty!

ngek! panghadluk ra diay na?hehe wala man jud ko nakakita ug quad kit diri (4x4GB).

kinsay ninyo naka try ug two kits of 2 x 4GB? or 2 x dual kit?

payts ra?

otherwise diri na lang ko sa 16gb dual kit (2 x 8GB) para sure.hehe

TIA

[kokong]

palit nalang corsair ram mao man ako gi gamit karon sa amo extreme6 2x4 basta ako na hibaw.an kai 2gb every core so i5 naai opat ka core so need nimo 8gb atleast piro para nako ari ko 16gb

[dwarfy]

thanks boss werty!

ngek! panghadluk ra diay na?hehe wala man jud ko nakakita ug quad kit diri (4x4GB).

kinsay ninyo naka try ug two kits of 2 x 4GB? or 2 x dual kit?

payts ra?

otherwise diri na lang ko sa 16gb dual kit (2 x 8GB) para sure.hehe

TIA

Pit Senyor!

[xStark]

thanks boss werty!

ngek! panghadluk ra diay na?hehe wala man jud ko nakakita ug quad kit diri (4x4GB).

kinsay ninyo naka try ug two kits of 2 x 4GB? or 2 x dual kit?

payts ra?

otherwise diri na lang ko sa 16gb dual kit (2 x 8GB) para sure.hehe

TIA

ako RAM before ky 2x2GB 1600mhz Ripjaws X
ok ra xa, pero kulangan ko f mgphotoshop nako
pero barato raman now ang mga 8GB..bump it up f kaya pa

[dwarfy]

actually 16gb ako plano jud, and here are my options:

• two kits of 2x4GB = 16GB
• 1 kit of 8x2GB = 16GB
• binagsa na 4GB sticks x 4 = 16GB

Ako lang pangutana kinsa nakasulay ug two kits of 2x4GB (same brand & model ako plano paliton).
Naglibug lang jud ko tungud sa gi comment sa G Skill Support in my previous reply.hehe

TIA

[werty]

panghadlok ra lagi to. hahaha

anyways check nalang sa imo motherboard manual for memory compatibility, if ana imo ka doubtful hehe...

[dwarfy]

actually compatible sha.
G.SKILL- World leading DDR3 computer memory and SSD manufacturer -Products

pero karon ra ko kabasa sa notes sa ubos:

"3. G.SKILL guarantees module compatibility within this specific memory kit. Combining with other memory kits or modules (even with same model name) is not recommended to avoid any compatibility issues."

Stick na lang ko sa 2x8GB kit. Para sure.hehe Tnx boss werty

[xStark]

actually compatible sha.
G.SKILL- World leading DDR3 computer memory and SSD manufacturer -Products

pero karon ra ko kabasa sa notes sa ubos:

"3. G.SKILL guarantees module compatibility within this specific memory kit. Combining with other memory kits or modules (even with same model name) is not recommended to avoid any compatibility issues."

Stick na lang ko sa 2x8GB kit. Para sure.hehe Tnx boss werty

kana compatibility depende na sa imong board
ng.mix ko sa una og
2x2GB 1600mhz ripjaws x
og 1x4GB 1333mhz ripjaws

different clock speeds, different timings
ako pgtaod y
SLOT 1: BLANK
SLOT 2: 2gb
SLOT 3: 4GB
SLOT 4: 2GB

g.downclock sa board ang rams to 1333, on ra ghapon, wala ko ngkaprob pod, wala xa mcrash/bsod

payter na keo nang 2x8GB D:

hope to see ur build soon

[senpai91]

@ts since you're purpose is for graphic designs e.g. graphic designs and video editing..16gb of ram will do the job.