Asking for assistance in assembling PC

[Utan_Tinunoan]

---

girl ka Ts? or boy? hehe. good luck!

[street_of_no_return]

be advice TS, if dili mahaom sa imong ge.butangan ayaw pugsa kai dili na mao..

[boyett]

@TS kaya na nimo.... in case maka encounter ka ug problema... naay daghang helping hands diri sa istorya, just post or pm...

Careful lang sa static...

Hope it helps....

[reverb]

you can check youtube for tutorials or much better if you can have a technician at your side while you assemble it..stamparden care is right be carfeul with ESD

[harhar]

Hi mga Istoryans,

Mag ask lng unta ko ug tabang. Plan ta nako mag assemble ug pc from scratch. Ang problem lng kay zero experience pajud ko in terms of actually assembling the parts..

Kinsay good soul dra nga motabang nako? naa ko gapuyo sa apas, halfday lng gud nato ni iassemble if makaya ra, willing pud ko mghatag ug gamay cash pra ma compensate ang time nmu. ang ako lng jud goal kay mkatuon ko sa mga parts ug unsaon pag assemble kay pakiulaw lng ko nga CS grad unya dli ko kblo mag assemble ug cpu.. hahaha

salamat mga Istoryans

Tanawa lang ang manual, steb by step mana...

[jean321]

Hi guys, thanks sa inyo support. I'm done with building my PC and I dedicate this to the Istoryan Community who helped me not only technically but also for the parts as well.



Specifications :

AMD Phenom II x6 1090T 3.2Ghz (Istoryan not wanting to be mentioned)
MSI 890gxm-g65 (Istoryan not wanting to be mentioned)
Philips 23" LED Monitor 234CL (Istoryan not wanting to be mentioned)
Sapphire Radeon HD 7850 2GB GDDR5 OC Version (Thanks Sir BURN_BaD)
Antec 550W VP550P (c/o NU Tech SM)
500gb WD Caviar Blue 7200rpm (c/o NU Tech SM)
4gb Patriot DDR3 1333Mhz w/ Heat Spreaders (c/o NU Tech SM)
ASUS DVD-RW+ (c/o NU Tech SM)
AeroCool StrikeX-Advance White Edition (c/o NU Tech SM)


Thank you guys very much. cheers!

[jimmy128]

nice build! helpful jud ni mga istoryan!

[domzgnrlover86]

nice rig you got there miga diris istorya daghan jud mga banggiitan diri... di ka magmahay ani nga site...kay daghag mga peepz diri nga willing sad mutabang and share sa ilang mga expeiences/ideas og maghatag pag mga advices

[winjwheel]

@All : salamat guys, at least naa nakoy confidence. I'll try to learn on my own, palpakerns man gud ko bsta mga inani mao gakakulbaan ko... hehe. post nlng ko if ever dli jud nako masolbad.. Thanks mga brad!

maau na, learn on your own...sakto pud to ilaha, naa daghan tutorial online...kaya ra lage na...hunahunaa lng nga ga.solve ka ug puzzle...mas lisod pa cguro ang puzzle ani!!

[winjwheel]

Hi guys, thanks sa inyo support. I'm done with building my PC and I dedicate this to the Istoryan Community who helped me not only technically but also for the parts as well.



Specifications :

AMD Phenom II x6 1090T 3.2Ghz (Istoryan not wanting to be mentioned)
MSI 890gxm-g65 (Istoryan not wanting to be mentioned)
Philips 23" LED Monitor 234CL (Istoryan not wanting to be mentioned)
Sapphire Radeon HD 7850 2GB GDDR5 OC Version (Thanks Sir BURN_BaD)
Antec 550W VP550P (c/o NU Tech SM)
500gb WD Caviar Blue 7200rpm (c/o NU Tech SM)
4gb Patriot DDR3 1333Mhz w/ Heat Spreaders (c/o NU Tech SM)
ASUS DVD-RW+ (c/o NU Tech SM)
AeroCool StrikeX-Advance White Edition (c/o NU Tech SM)


Thank you guys very much. cheers!

wow..job well done...bravo TS!!