Page 12 of 211 FirstFirst ... 2910111213141522 ... LastLast
Results 111 to 120 of 2105
  1. #111

    Default MOTHERBOARD & HARD DISK REPAIR/ DATA RECOVERY SERVICES


    bai pwede caps lang sa epox mobo akong paliton.. naa kay stocks? mga 6 - 8 pcs lang kay ang akong mobo hingbutoy naman ang mga caps ato gud... pm nya bai kung pwd caps lang paliton nako

  2. #112
    Elite Member Platinum Member ruelnov's Avatar
    Join Date
    Jan 2005
    Gender
    Male
    Posts
    707

    Default MOTHERBOARD & HARD DISK REPAIR/ DATA RECOVERY SERVICES

    what is the scope of that hd service of yours? i mean, what problems can be fixed?

  3. #113
    Elite Member Platinum Member ruelnov's Avatar
    Join Date
    Jan 2005
    Gender
    Male
    Posts
    707

    Default MOTHERBOARD & HARD DISK REPAIR/ DATA RECOVERY SERVICES

    aw nindot ni kay alegre na ta!
    silingan pa jud. pasebo-a nya ta isa ka paya bugas bro ha kon magkina-unsa, hehe.

    btw, kon dunay dili makaya ayo nimo dha just let me know.

    can you repair corrupted HD firmware? I mean, corrupted servo information/ corrupted translator/ corrupted Defects Table? Take note dili ni sila about bad sectors.
    how about kanang HD nga dili ma-detect sa BIOS? what's your success rate with it?
    can you recover data from HD nga dili ma-detect sa BIOS? di ra ba jud na kaya sa Ontrack ug kanang ubang recovery software around.

  4. #114
    Elite Member Platinum Member ruelnov's Avatar
    Join Date
    Jan 2005
    Gender
    Male
    Posts
    707

    Default MOTHERBOARD & HARD DISK REPAIR/ DATA RECOVERY SERVICES

    aw mao ba.

    again, sangpita lang nya imong silingan diri bro kon dili madala ayo dha.

    kaluoy sa diyos, we have the solution to abovementioned HD problems.

  5. #115

    Default MOTHERBOARD & HARD DISK REPAIR/ DATA RECOVERY SERVICES

    halu sir ruel!

    sori kron pako nkareply, na bc man gamay bhin ug editing ug pics(using photoshop cs) nya ngchat pud mi ni spaceman kay iya man ko gitudloan saon pagamit ang flash mx 2004... for website.. u know nman nga interested man kaayo ta basta electronics & computers in either hardware or software... mkalingaw man gud...

    about my mobo: dli man ko kabalo unsa model ini kay wla man nkabutang, unlike asus nga naa gyud like p4s533-mx or mga ingon ana.. the cpu is Compaq Presario 5003US, 5000 series
    wla pud ko kabantay ug BIOS unlike sa uban nga socket or soldered, naa noon chip nga square nga naa nkasulat : INTEL N82802A88 (mao guro ni...)
    A0360284
    wla pud noon ko ngtry ug ilis ug memory, pero ako gi puli2x iya mem kay 2 man kabouk, bsag asa mo hung up gyud. even sa BIOS ko mosulod (dli abtan ug 3mins)

    about my HDD: Seagate ST 340810A, 40g , wla pud nko gtry ug testing ug using seagate disk manager, kana btaw 2 diskette nga pwde nmo i format, restore mbr ug partion using 98/nt/xp imo OS.. pero dli gyud ma detect sa BIOS, nya wla pud sound nga daut nga saba , unlike sa ako uban dri sauna nga giilisan gyud nko kay saba gyud ayo, morag naghiwi ang motor ba.. hehehe. siya wla sba,but naa vibrate w/c means andar ang motor. i knw dako nig chance nga maayo, unsa man pwde nko matesting ini sir ruel? unsa man pwde nko mabuhat kron?

    tnx sir ruel!

  6. #116
    Elite Member Platinum Member ruelnov's Avatar
    Join Date
    Jan 2005
    Gender
    Male
    Posts
    707

    Default MOTHERBOARD & HARD DISK REPAIR/ DATA RECOVERY SERVICES

    To drkhero:

    About your Compaq mobo, looks to me more of a capacitor problem than a BIOS problem. The fact that you can boot the system and get into BIOS setup, I would not be inclined to touch the BIOS side of it.

    Also, the soldered INTEL N82802A88 chip you saw was the BIOS chip. The fact that it is soldered makes it not possible to reflash without detaching from the board. And detaching/remounting it would be very laborious, tricky, and not worth doing.

    If I were you, I would try attaching a slower processor (400 to 600 Mhz) to see if it runs stable at lower frequency. The reason for this is that a slower processor has a much lower current drain on the VRM Capacitors, and so the board would appear to run stable when some capacitors are already marginal in condition. If it does run stable, then that tells you that you have a capacitor problem FOR SURE.

    Another way to tell that you have a capacitor problem (since you don't have an ESR Meter) is to see if your PC restarts when you press CTRL-ALT-DEL after your system hangs. If your PC doesn't restart, you have a capacitor problem. IPUSTA PA NAKO AKONG UGANGAN, hehe.

  7. #117

    Default MOTHERBOARD & HARD DISK REPAIR/ DATA RECOVERY SERVICES

    hehehe!

    kalit man lang ka ka yaga2xon sir ruel!
    i thnk gyud kay caps.. kay dli man mo off nig ctrl-alt-del...

    how about sa HDD sir ruel.. unsa imo ika suggest? naa pman ko capacitor dli,, lisod lng pag pinpoint ug asa guba... i need to bring it to you nig anha nlng sa cebu.. lisod man ug ilisan tanan. nya gmay ra diay guba.. dba?

    tnx sir ruel!

  8. #118
    Elite Member Platinum Member ruelnov's Avatar
    Join Date
    Jan 2005
    Gender
    Male
    Posts
    707

    Default MOTHERBOARD & HARD DISK REPAIR/ DATA RECOVERY SERVICES

    aw yaga2xon pod ta uy usahay! kasab-an man gani nako diri mga dead board ug hd nga gahi banhawon, hehe.

    bitaw, ilisi nalang nang tanang caps surrounding the processor aron matul-id na. mas maka-save pa ka kon ing-ana kaysa moari paka.

    about ur hd, that's more tricky to fix compared to mobo. I mean, 1 false move tigok! but here are some tips how to have it detected, but please do at your own risk, OK?
    1. Lay it on its side (magtakilid ba), then try connecting to PC and see if it can be detected na,
    2. Or wrap it with plastic, put inside your REF (freezer) for 2 hours, remove the plastic wrap, try connecting to PC immediately, etc.

    If dili pa jud matedect, corrupted na jud ang firmware ana (that's why dili maka-initialize ang HD) or defective ang Logic Board. Try replacing with logic board from another good HD, but BE SURE PAREHA ANG MODEL # ug FIRMWARE REVISION #.

  9. #119

    Default about my mobo

    halu sir ruel!

    kuyawa pud ini oi... hehehe, cge try lng ghapon nato... nya if dli madala pwde dalhon dha nmo? bsin dli naka modawat ini after? hehehe

    tnx sir ruel... nginstall kog linux kron fc3 sa ako isa ka pc... testing ba... tuon man pud ta ini kron.

    tnx again sir ruel! mo pm nya ko nmo ug unsa man gani

  10. #120
    Elite Member Platinum Member ruelnov's Avatar
    Join Date
    Jan 2005
    Gender
    Male
    Posts
    707

    Default MOTHERBOARD & HARD DISK REPAIR/ DATA RECOVERY SERVICES

    Kon dili jud madala, ipa-doktor na jud na nimo. Dawat ra ghapon ta ana bro.

    btw, the tips i gave u are just for having it detected by BIOS. but u need specialized hardware and software to repair firmware errors or fix physical bad sectors after ma-detect ang HD.

    also sent u pm.

  11.    Advertisement

Page 12 of 211 FirstFirst ... 2910111213141522 ... LastLast

Similar Threads

 
  1. For Sale: Def Items?? am2 mobos, procs, hard disk, video cards for 1.5t
    By lostinspace in forum Computers & Accessories
    Replies: 2
    Last Post: 06-17-2013, 06:50 PM
  2. Looking For: CPU, board, DDR2 Ram, Sata Hard disk, Video Card and PSU
    By dyad in forum Computers & Accessories
    Replies: 50
    Last Post: 11-08-2010, 10:14 PM
  3. For Sale: or Swap: Motherboard, Memory and Video Card
    By reishoto in forum Computers & Accessories
    Replies: 35
    Last Post: 07-04-2009, 08:13 AM
  4. diko kita software sa video card sa ako laptop.
    By rickdy in forum Computer Hardware
    Replies: 16
    Last Post: 12-10-2007, 03:44 PM
  5. Video Card ram problem....
    By wh3ng2004 in forum Computer Hardware
    Replies: 14
    Last Post: 11-24-2007, 01:20 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
about us
We are the first Cebu Online Media.

iSTORYA.NET is Cebu's Biggest, Southern Philippines' Most Active, and the Philippines' Strongest Online Community!
follow us
#top