RAM and graphic card questions

[butitoy]

if ur mobo is 1600 capable..no need to OC the bios will automatically handle the ram sticks

if 1333 ra kutob ang mobo , mu step down ur ram into the max ram speed the mobo can handle but with a tighter CAS settings

or u OC ur Procie with Assync or Sync settng RAM : FSB , that will make ur Mobo ran the RAM into a OC result relaxed 1600MHz speed < this is the gud thing on RAM with higher than mobo limitation speed

[jesse5648]

so mga sirs, since i dont want to OC kay di pako ka finance sa other hardwares, its best to just get 1333 cards nlng usa right

about sa akong mobo, nakita ko ni siya sa specification,

RAID Function

- SATA II 1~5 support RAID 0, 1, 0+1, JBOD mode by AMD® SB710

MSI Reminds You...
• The RAID setup floppy disk is optional depending on the districts. You can download the files from the website to make the setup disk.

before ko malimot MSI 880GM e43 akong mobo boss,

whats the difference between turbo boost ug kaning OC

nakita lang nako ani nga link CLICK HERE then just scroll down

[Rainerius]

Just buy as much RAM as possible. Don't bother with timings, latency, special combo I read from the internet stuff etc etc.

[jesse5648]

boss rain, i just cant go buy stuffs and waste money, coz i know puhon ma upgrade raman gud, for now, id go for the cheapest way to upgrade my system, though i can research alot over the internet, but still, personal experience from fellow users sa item is a big help, there is alot to learn from different experience of users man gud boss, so as for me nga di inana ka financially stable, i gather information from real people, then apply what i learn from you guys ike one comment that 8gb - 16gb wont give any difference yet for now, , ,so base ana, i'd go for 8gb lang temporarily, then kung naa nay support, or makatigom, id updgrade my other hardware components

[Rainerius]

boss rain, i just cant go buy stuffs and waste money, coz i know puhon ma upgrade raman gud, for now, id go for the cheapest way to upgrade my system, though i can research alot over the internet, but still, personal experience from fellow users sa item is a big help, there is alot to learn from different experience of users man gud boss, so as for me nga di inana ka financially stable, i gather information from real people, then apply what i learn from you guys ike one comment that 8gb - 16gb wont give any difference yet for now, , ,so base ana, i'd go for 8gb lang temporarily, then kung naa nay support, or makatigom, id updgrade my other hardware components

Yeap as much as possible lang, 8GB is plenty for regular use unless you run Virtual Machines or multi box with World of Warcraft. Go ahead you can't go wrong with your decision.

[jesse5648]

sir unsay mga common jud kaayu nga problem after OC'ing rams and VCs

[keropi]

VC - They just die. That all. No big deal..
Ram - Rarely do you get a dying ram..

[Rainerius]

sir unsay mga common jud kaayu nga problem after OC'ing rams and VCs

Heat will kill your components faster. Anything that produces too much heat will damage iteself and other components aswell. VCs easily get to near boiling point so mao na maka tabla sa uban parts.

[lloyd_joy]

share diay ko sa akoang 1st experience sauna sa pag OC sa gpu na binugo... pataka lang ko... hehehe... used a radeon x800pro... its' an agp bus on my MoDT rig... after a while, namatay lang ug kalit... no display... hhhaaayyy... na subrahan to's kainit for sure...

[jesse5648]

kung airflow lang ang basihan mga boss kaya ra kaha lets say, i have 2x80mm sa likod, 2x80mm sa front, 1x120mm sa sidepanel, 1x120mm sa ilawm, and 1x120m sa taas, 7fans tanan, can i OC with that?? and ang exhaust nako kay ang sa likod nga fan, okey raba nya intake na ang uban nabilin na fan