CL9 to CL7 RAM Timings

[Archfear]

---

Hello mga master... ask lng ko about ram timings... can i manually set the timings of my rams from CL9 to CL7?
I got 2 x 4gb Kingston HyperX CL9 @1600mhz 9-9-9-24 timings... nahan ta ko akong 7-7-7-21 with the same speeds of 1600... ako gi try pero ni totot man hinuon akong pc unya wa ni boot... maybe i need to add voltage sa mga rams... if so, pila man sad ang optimal voltage akong e set? please help mga masters... thanks daan...!

[werty]

ang ako ra tambag is isolate and adjust timings one at a time, adding a few volts if an instability arises or if the pc doesnt boot, if mu ok then proceed to lower, if not mao na ang minimum value then restore that value to its default and do the same test to the next timing value and so on and so forth... then combine the values kung unsay stable... this is just like overclocking, one step at a time...

[fearnel]

^^one small step for man. one giant leap for timings. hehe.

[keropi]

Kutob ra na 7-8-7-24 at best. 1.65v IF you're lucky.. All chips are different and 4gb modules are harder to run at tighter timings in dual channel compared to 2gb modules.

If ganahan gyud ka, palit na lang ka specially binned low-latency rams = TipidPC.com | Memory Desktop- G.Skill Ripjaws X 8gb DDR3 1600/PC3-12800 (F3-12800CL7D-8GBXH)

[Archfear]

thanks boss.... di nalang kuni hilabtan oie... wahehehehe.... thanks boss werty and keropi...