about G-SKill Ripjaws

[negative_black03]

---

its specified that Gskill Ripjaws X 4GB 2GBx2 DDR3 1333 CL7 is designed for the Sandy Bridge, will this perform fine/great with the first gen i5/i7 procis??

nya i also have the CM V6GT cooler, masangko ni xa noh?

unsay recommended kaha na Gskill ram with i5-650?

[blizzaga4]

OK ra na ang mems. Pero it depends sad if ang mem slots are close to the processor. UNsay motherboard nimo

[keropi]

Get the GSkill ECO kun dili ka sure. I had to get those because my Scythe Mugen ate all the memory clearance.

[EarlZ]

It can work but you may need to set it to run at 1.60 or 1.65v depending on the board.

[negative_black03]

OK ra na ang mems. Pero it depends sad if ang mem slots are close to the processor. UNsay motherboard nimo

katong asus P7H55-M LX

[yohann]

yup pwede, akoa bag o pud palit k2ng ripjaws-X 1600 8gb. gamit s i5 760.. morag mosangko siguro na ky taas ang sink den dako ang v6gt.. k2ng sniper palita ky mubo ang heatsink

[negative_black03]

yup pwede, akoa bag o pud palit k2ng ripjaws-X 1600 8gb. gamit s i5 760.. morag mosangko siguro na ky taas ang sink den dako ang v6gt.. k2ng sniper palita ky mubo ang heatsink

thanks sa info gyud brad!

pangita on ko na na item sa TPC.

[balipseyev]

Ok ra na, pde man gali na G.Skill sa AMD...