Page 1 of 2 12 LastLast
Results 1 to 10 of 20
  1. #1

    Default from IDE to SATA2... why mas dugay nanuon mag load and SATA2 sa windows startup?


    good day istoryans. at first i had an IDE 80gig seagate 7200rpm hardisk....

    my rig is c2d e6300
    msi-p965neo-f
    2gig geil ddr2 800
    320mb 8800gts

    if mag load ang windows, mga 3 and a half times ra mudalagan ang katong blue thing.. so ok ra cya ka paspas mag load.

    karon, ni change to to a SATA2 160gig seagate 8mb cache 7200rpm... ang nahitabo kay imbes nga 3.5 times ra mudalagan ang blue thing, ika 10 times naman nuon, so mas dugay nanuon cya.

    nganu man mas dugay nanuon mag load ning SATA2 nako kaysa IDE?

    It doesnt sound right because i have another pc nga p4 3ghz with 1gig ram with 40gig IDE hdd unya 6times mudalagan ra ang blue thing while windows loading. mas paspas nanuon diay mu load ako p4 kaysa c2d. it doesnt sound right. what could be the problem?

  2. #2

    Default Re: from IDE to SATA2... why mas dugay nanuon mag load and SATA2 sa windows star

    bro preha man ta mobo ug Hardisk exactly the same preha pod ta e6300, we can talk if ever e add ko sa imo ym jojo_lun1119.....ok
    ok ra man time sa loading sa akoa, although naay post ang blue pero mo continue ra dayun.....

  3. #3

    Default Re: from IDE to SATA2... why mas dugay nanuon mag load and SATA2 sa windows startup?

    so far diri rapud sa loading with the blue thing running from left to right ang problema nako. pero pagsulod nako sa windows desktop, paspas na and no waiting. and everything else runs fast too.

    i also found out nga pag benchmark nako using 3dmark03(old na ni), ni increase ug 2,000 points ako score compared to using IDE.
    with IDE 25,816 points
    with SATA2 27,880 points

  4. #4

    Default Re: from IDE to SATA2... why mas dugay nanuon mag load and SATA2 sa windows startup?

    This is the exact model name of my new hardisk:

    Seagate Barracuda 7200.10 ST3160815AS 160GB Hard Drive
    (Serial ATA-300, 7,200 RPM, 8MB - MPN: ST3160815AS)

    Description: This 160GB Barracuda 7200.10 SATA internal hard drive provides a speedy 4.16 msec average latency at a 7200 rpm spindle speed. Its 3Gb/s transfer rate via its SATA interface will knock your socks off. Its Perpendicular Recording increases data density while decreasing moving parts for a more dependable drive. Plus, this super-quiet drive's SoftSonic motor enables whisper-quiet operation while its Adaptive Fly Height offers consistent read/write performance from the beginning to end of your computing workloads, and its Clean Sweep automatically calibrates the drive each time you power up.

  5. #5

    Default Re: from IDE to SATA2... why mas dugay nanuon mag load and SATA2 sa windows star

    whoopz sakto jud ka bai ambot kaha no basta mo sulod na sa windows perting paspasa, normal ra man cguro na bai whoopz.

  6. #6

    Default Re: from IDE to SATA2... why mas dugay nanuon mag load and SATA2 sa windows startup?

    @whoopz and baijo: OT lang ni gmay mga bro...for comparison purposes lang, what are the temperature ratings on your harddisks at idle and load?? gnahan lang unta nako icompare sa ako samsung SATA2 160gb...hehe...mas bugnaw mn gd daw ang samsung hdd compared sa seagate...just wanted to know if its still true now...

  7. #7

    Default Re: from IDE to SATA2... why mas dugay nanuon mag load and SATA2 sa windows startup?

    bro, basin it takes longer to load the SATA2 driver. kay kanang naay blue thing na inyo giingon, naginstall na ang OS sa drivers. basin nya mga 2 seconds longer niya maoptimize the driver sa SATA2 for better performance during inside windows environment. i think that is not a big thing though.

  8. #8

    Default Re: from IDE to SATA2... why mas dugay nanuon mag load and SATA2 sa windows star

    spookey you may be right bitaw kana blue ga load na sa drivers, i mean all drivers, mao cguro no,...ken..about sa ako temp kay 44C, dont know with whoopz pila kaha pod iya temp sa HD

  9. #9

    Default Re: from IDE to SATA2... why mas dugay nanuon mag load and SATA2 sa windows star

    bai kennruss, ako a kay 38-39C idle......44-47C load...mao na ang temp sa ako....

  10. #10

    Default Re: from IDE to SATA2... why mas dugay nanuon mag load and SATA2 sa windows startup?

    @baijo, low ralagi ako temps sa hdd nako. ako idle kay 34 then ang load ky 39. ako gamit pag detect ky pcwizard 2007.

  11.    Advertisement

Page 1 of 2 12 LastLast

Similar Threads

 
  1. Replies: 586
    Last Post: 10-04-2017, 10:00 AM
  2. Replies: 35
    Last Post: 10-12-2012, 11:23 PM
  3. Replies: 29
    Last Post: 04-30-2009, 10:54 AM
  4. why my gateway laptop cannot be downgraded from vista to xp..
    By baseoverhaulshop in forum Computer Hardware
    Replies: 25
    Last Post: 05-04-2008, 04:02 PM
  5. why my gateway laptop cannot be downgrade from vista to xp pls help
    By baseoverhaulshop in forum Software & Games (Old)
    Replies: 40
    Last Post: 01-06-2008, 10:35 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
about us
We are the first Cebu Online Media.

iSTORYA.NET is Cebu's Biggest, Southern Philippines' Most Active, and the Philippines' Strongest Online Community!
follow us
#top