help with my mbd-80 battery pack

[earlybird]

---

Mga sirs,madams,,,need your help,,i bought a new MBD80 batt pack for my d90 and used one original nikon battery on one slot and one generic battery on the other slot but the problem is when the generic battery run out of power(na drain na)dili na ma ON ang camera kung naa ang drained generic battery sa slot so i removed the drained battery out of the slot and then ni On balik ang camera.,,,murag di man ni normal?what do you think? diba ang purpose sa batt pack is to have atleast continous power on your camera incase na ma lowbatt ang usa naa pa lain,,,,i need your inputs please,,,thank you guys

[slycry]

same problem here... i thought ako lng nka experience ani... sa akoa pud nag shoot ko ug debut then ni kalit lng ug off akong cam, then dli nman mo on... then imposible man sad hurot ako batt, kay bag.o man gi charge ang usa ka orig ug usa ka generic... then mao to ako gi try ug binagsa ug insert ni gana ni on nman ako cam... then mao to.. wala nlng pud ko ni gamit ug generic ato nga time... karon... naa nkoy additional orig batt... and its working fine naman...

[GTlik]

generic battery is useless.... delikado pa imo camera ana. if maka afford man gani mo sa D90, try investing on original battery. its a small price to pay than having a big problem on your camera.

[hayden]

Pareha raman ug behaviour regardless what batt brand you use, sulayi ug OEM nga batt mo-tirik ra jud japon na. If mag-generic ka then go generic on both batt ky ang OEM lahi ug mAH compared sa generic types.

[wooden_heart]

ako i-relate sa ako work and experience ha... ug mag parallel ka ug duha ka power supply like generators, battery or uban pah, it should be nga dapat same sila ug specs in all manner (operating voltage, frequency, ampHr etc) mao nah sa power system (sensya na ako lang jud ma-relate) ug mag butang ug duha ka power source to supply one load, it is a must nga same sila ug manufacturer para atleast maka sure ta nga same sila ug standards... balik ta sa topic... ug lahi2x ug brand imu battery gi-gamit, wala ta kabalo ang usa is dali sya ma low-batt or dili accurate iyang amper-hour rating with the other one, so mahitabo ug ma lowbat na sya, the other remaining battery will try to charge his battery-mate, mao na nga instead nga iyang ihatag sa imu camera ang power nga naa sa "charged" battery, iya na ihatag sa iyang katapad nga battery, so nahulod ug duha na iyang gi-supplyan, tendency, dili gyud na niya makaya so wala gyuy operation mahitabo... i hope wa teka napa libog ug samot bro...

[sizzlingROBOT]

Yes, sakto jud ka, Wood, that you pointed out that placing two batteries with different electrical specifications in parallel would cause the other battery to discharge much faster. It harms you camera as well.

Same ra ni principle when you change batteries to your flash. Kailangan all four batteries are fresh and equally charge. And, combination of two different batteries to operate it is not advisable.

ako i-relate sa ako work and experience ha... ug mag parallel ka ug duha ka power supply like generators, battery or uban pah, it should be nga dapat same sila ug specs in all manner (operating voltage, frequency, ampHr etc) mao nah sa power system (sensya na ako lang jud ma-relate) ug mag butang ug duha ka power source to supply one load, it is a must nga same sila ug manufacturer para atleast maka sure ta nga same sila ug standards... balik ta sa topic... ug lahi2x ug brand imu battery gi-gamit, wala ta kabalo ang usa is dali sya ma low-batt or dili accurate iyang amper-hour rating with the other one, so mahitabo ug ma lowbat na sya, the other remaining battery will try to charge his battery-mate, mao na nga instead nga iyang ihatag sa imu camera ang power nga naa sa "charged" battery, iya na ihatag sa iyang katapad nga battery, so nahulod ug duha na iyang gi-supplyan, tendency, dili gyud na niya makaya so wala gyuy operation mahitabo... i hope wa teka napa libog ug samot bro...

[slycry]

what if 2 orig nikon batts... let's say ang usa kay 40% and ang usa kay 85% okay rana?

and also what if drain najud ang usa ka batt? i remove jud sya from the batt grip? or okay ra pabilin then hantud mahurot ang pikas? kay dman jud cla ma hurot ug dungan...

[jojobanana92400]

^Sir, im using an original d90 battery, and yep if 40% ag is then ang isa 85% ok rana sir, but what i usually do is, i charge both full battery then ako e sud sa battery holder, if imung e use na imung cam, ang isa ma used na, so e hurot na sa imung cam ang used battery then if mahurot na cya, automatic na cya transfer sa pikas battery ug use no need to get the battery out of the casing. makita man sad sa imung info sa cam sir, which batt the camera is using if it's using the left/right battery.

[slycry]

ahhh i see... thanks for answering my question sir... =]

[arvinbenitez]

up for this one.....................