Slightly used. Crown Professional Power Amplifier. Selling for 9k only. With 2 units speaker stand and one mic stand included.
If interested, please text or call: 09336007161
https://www.facebook.com/26135776057...type=3&theater
RFS: Need funds for other projects.
SOLD! Thanks Istorya!
Specification
CA-560
Rated Power
(1kHz, THD + N = 0.1%)
8Ω stereo RMS Power
2 X 560W
4Ω stereo RMS Power
2 X 840W
2Ω stereo RMS Power
2 X 890W
8Ω bridge RMS Power
1680W
4Ω bridge RMS Power
1880W
Crossover
Low Pass
0Hz-120Hz-6dB
Low Cut
120Hz-20kHz-6dB
Frequency Response (+0/-0.3dB, 1W/8Ω)
20Hz-20KHz (+/-1dB)
Power Bandwidth (rated power at 4Ω, 1% THD+N)
20Hz-20kHz,-0.84dB/+0dB
Tour Class Protection
DC protect, Short circuit protect, High temperature protect, Current inrush protect, Input overload protect, Output, Soft
startup protect
THD + N (rated power, 4Ω/1kHz)
<0.5%
SMPTE IMD (rated power at 8Ω, 50Hz & 7kHz)
<0.5%
Damping Factor (10-400Hz at 8Ω)
≥300
Input CMRR (1kHz)
≥60dB
Standard Input Sensitivity (rated power at 8Ω)
1V
Input Impedance (balanced/unbalanced)
20kΩ /10kΩ
Hum and Noise (”A” weighted,-80 dBW)
95dB
Crosstalk (”A” weighted, full power at 4Ω)
≥60dB
Class
AB
Input Connectors (per channel)
XLR or Jack
Output Connectors (per channel)
2-way binding posts or Speakon connectors
Power Supply (factory configured)
220V/60Hz
Idle Current Draw (220V)
0.2A
1/8 Power Curr. Draw (typical music cond., 220V/4Ω)
5.25A
1/3 Power Curr. Draw (cont. music cond., 220V/4Ω)
11.5A
Max. Curr. Draw (continuous music cond., 220V/4Ω)
15.0A
Thermal Emissions (1/8 Power, 4Ω)
4750BTU/hr
Thermal Emissions (1/3 Power, 4Ω)
6300BTU/hr
Cooling
2-speed DC fan, air flow from front to rear
Controls
Front panel: 2 attenuators, power switch; Rear panel; signal ground lift & mode switches; filter switch
LED Indicators (per channel)
Limiter, Signal, protect, power
Construction
Steel chassis, 16 gauge. Double thickness in rack ear areas.
Dimensions (Height x Width x Depth to rear rack ears)
88 x 482 x 397mm
Gross Weight
20kgs
Net Weight
16kgs