Package includes REMOTE CONTROL/THE UNIT/ AND THE MANUAL


The 4805 features a 16:9 format DLP chip in 854x480 resolution, and a six-segment, 4x speed color wheel. As is typical with many home theater projectors these days, the lumen output is relatively low, rated at a maximum of 750 ANSI lumens. However, contrast is a very high 2200:1. Therefore, for best results the unit should be used in a darkened viewing space with little or no ambient light.

Lens and throw distance. Manual zoom and focus with a 1.2x zoom range. A 100" diagonal 16:9 image is obtained in the range of about 13 to 15.5 feet (based upon our measurements, as of this writing the throw distance calculations for this model on the Infocus website are off by about a foot at 100" diagonal).

Lamp. Dual mode 160W/200W SHP with up to 4000-hour lamp life in low power mode.

Compatibility. DVI (HDCP), component and RGB HDTV 1080i, 720p, 576p, 576i, 480p, 480i, and computer resolutions up to XGA (1024x76. NTSC, PAL, SECAM.

Connection panel. Located on the rear of the unit. Inputs include one set of 3 RCAs for HDTV and component progressive and interlaced signals; one M1 port that takes DVI (HDCP), HDMI (with adapter), RGB and component HDTV; one S-video port; one composite video jack. In addition there is one set of stereo RCA audio inputs and a 12v trigger for screen drop.

Brightness uniformity. Very good, with illumination perfectly even across the left two-thirds of the screen and fading no more than 15% toward the right edge.

FOR MORE INFO CLICK HERE:Review: InFocus Screenplay 4805

plz post your offer or txt me @ 09198035055/09326418381