My Monitor has no Display!!! I really need your help gurus!

[rexdudi]

---

Guys! I'm already at my wits end here >___<

My monitor won't show anything(just a blank screen...its led keeps blinking blue)
although the CPU seems to be working just fine(the caps lock, num lock keys work on the keyboard and I can hear booting sounds)

I tried to connect the VGA cable to the motherboard's onboard videocard and it showed some display...but my GTS450 isn't detected whatsoever giving me a low system rating (

I really appreciate whatever help I can get from you guys!

Thanks! Happy New Year~!

[werty]

remove and reinstall imo GTS 450
also check imo 8/6 pin vga auxilliary power

[rexdudi]

thanks sa quick reply boss werty...already did it na...even cleaned the part where it goes to the pci-e slot and brushed the slot of any dust...

could it be tungod ni sa sata port na nag ali sa videocard? dako man iya cooler gud then tungod jud sa pci-e slot naka position ang sata port...

[werty]

just try to reinsert again, make sure haom jud sya and naka lock. also check ang external power connector sa videocard. i transfer na ang sata na tungod sa videocard, pwede raman nmo ibalhin bisan asa na sata and not cause software problems.

[rexdudi]

cge ako i-check unya tanan just in case i missed something thanks man!

[Dansuy]

Check your GPU if wala bay mga taya2x or something like gi-ihian sa mga mananap or iliga, kay ang ako-a pare-pareho ani nga prob pero after gi limpyuhan ug maayo na uli-ulian na. Good luck sir...

[Sempron Guy]

if you can get a blower, try cleaning the pci-e slots with it, check pud if naay damaged pins sa sulod sa slot, naa ka laing pc pwede i testing imo GTS 450?

[acronis]

joy.... the ultimate cleaning solution.. though never tried it. hahaha

[domzgnrlover86]

clean your PCI-E Slot TS and also the Gold Contacts of your VC using eraser basig hugaw ra kana...ug mahimo, limpyuhi jud imung system unit kun galing hugaw na kaayu....