need help asap

[woodstuck]

---

is this illustration correct? still couldnt network the 2 computers? hope u can help me where and what to configure. can anybody help me about the configurations? thanks alot
[img width=467 height=403]http://img.photobucket.com/albums/v336/pauloh6000/ILLUSTRATION.jpg[/img]

[Anton]

1. Connect the DSL Modem/Speed Touch DSL to the Surecom router.... In the port where it says "WAN"...
2. The from the router connect to the 2 PCs...

I think you still need to configure your router to make the PPPoE connection to PLDT.... How to do this is in the manual i think

[woodstuck]

i did that already. but it will just appear connected, but no internet sharing. someone suggests me to use 2 lan cards for the server

[Anton]

Yes....did you dial the net using the surecom router?
most dsl routers.. have a built-in webserver/interface to allow you to connect throught the modem.. you still need to set this up...
surecom routers are pre-configured to the address 192.168.1.1 and admin/admin as its username/password.

Have you tried using the web-interface? ANd inputed ur username/passowrd to connect to pldt?
If yes.. and it connects.. and still no internet on your PC's.. try:
1. go to Control Pnael->Network Connections-> Create New Connection
2. Select Connect To the internet -> Set up My connection Manually -> Connect using a broadband connection that is always on -> Finish

[abelbaron]

You might also try to check if you have the latest firmware running on your router. I had a situation before when the router didn't work right out of the box and I only got it to work after I've upgraded and applied the firmware patch from the router manufacturer's website. Having said that, try Anton's suggestion, it should work.

[woodstuck]

la gihapon uy
. sakto ako illustration?

[woodstuck]

anyone can give me an illustration?

[Anton]

[img width=467 height=403]http://img367.imageshack.us/img367/9331/hehehe6tp.jpg[/img]

[gtjr_ph]

unsay model number anang imong speedtouch modem?

[mixmuzix]

Clone the original working lan card physical address to the router. "ipconfig /all" copy the pci lan card physical address. Input that into your router.

Your router must carry the physical address of the lan card originally installed.