CPU and GPU Overclocking

[gilnaks]

---

Kinsay nakasuway na diri og overclock sa ilang rig?

[hybrid666]

Daghan. Hahaha unsay tumong ani nga post?

[archt_vin]

padaghan sa post

[gilnaks]

Daghan. Hahaha unsay tumong ani nga post?

Mangayo unta kog tips para sa akong project run sub zero cooling. Di ba na makadaot kung negative ang temp?

[gilnaks]

padaghan sa post

Ngano diay kung daghag post bos?

[lloyd_joy]

Mangayo unta kog tips para sa akong project run sub zero cooling. Di ba na makadaot kung negative ang temp?

so, you use liquid nitrogen for the cooling? para ra man ni to get the highest OC value... but can't be used on a daily basis gawas mag design ka'g cooling system sa liguid nitro na dili manual ang pag tap-up nya...

sub zero cooling = liguid nitrogen

[gilnaks]

so, you use liquid nitrogen for the cooling? para ra man ni to get the highest OC value... but can't be used on a daily basis gawas mag design ka'g cooling system sa liguid nitro na dili manual ang pag tap-up nya...

sub zero cooling = liguid nitrogen

Inefficient man guro kung liquid nitrogen gamiton bos. Naay simple nga heat transfer system akong himuon with a case nga naa say system nga mkatangtang og moisture

[hybrid666]

Mangayo unta kog tips para sa akong project run sub zero cooling. Di ba na makadaot kung negative ang temp?

Honestly, I doubt daghan mag szc diri.

1. Unethical life for hardware
2. EXPENSIVE
3. Parts can rarely be found (labi na kung mangita ka ug tarong nga insulation)
4. Pang OC enthusiast naman ni (for tournaments, etc)

Pero to answer your question, sub-zero means below freezing point. It should be ok running it at negative temps.

[gilnaks]

Honestly, I doubt daghan mag szc diri.

1. Unethical life for hardware
2. EXPENSIVE
3. Parts can rarely be found (labi na kung mangita ka ug tarong nga insulation)
4. Pang OC enthusiast naman ni (for tournaments, etc)

Pero to answer your question, sub-zero means below freezing point. It should be ok running it at negative temps.

Ofc that's all part of the challenge of this project na but wa na nay problema nang parts kibaw nko asa mangita ana. Putting moisture aside, ok ra jud ba nga below freezing ang temperature sa cpu for long periods of time? Unsa may laing bantayanan nato ani

[hybrid666]

Ofc that's all part of the challenge of this project na but wa na nay problema nang parts kibaw nko asa mangita ana. Putting moisture aside, ok ra jud ba nga below freezing ang temperature sa cpu for long periods of time? Unsa may laing bantayanan nato ani

hehe I think it's best you look for answers else where. I doubt naa nag sub-zero cooling diri who actually tried it in long peripds of time, let alone tried SCZ jud hehehe