which is the problem ani, PROCE? MOBO? HDD? PSU?

[kevitzrey]

---

mga brader.. pa help unta ko, unsay problem ani akong na encounter..
karn pako naka encounter ani sa akong pag setup, so ga libog ko asay
pasanginlan na parts..



I have a DUALCORE E5200 2.5GHZ socket 775 bought from a fellow istoryan.. GiTest nako sa 3 different mobos, puros naay mga problema akong na test, abi pd nako mga moboard jud guba, ky dli ko
mo tuo na ang procesor guba, ky for me once mo display and detected sa bios, okay ra ang
procesor ana, dba?? pero i encountered this problems with same problem kada moboard..




mao ni cya prob:
-1st mobo: mo sud cya sa bios, mo sud sa windows, pero after awhile, mo hangup!
-2nd mobo: mo sud cya sa bios, mo sud sa windows, pero paslakan og usb flash drive mo hang!
-3rd mobo: mo sud gihapon sa bios. I changed HDD pd, nd PSU. pag reformat nako, dli cya maka tiwas
kutob ra cya sa menu, mo hangup napd..
-4th mob: BRAND NEW mobo nani, mo sud sa bios ghapon, detected as E5200 @ 2.5GHZ, pero under
frequency, 1.6ghz ra ang detected. pero once restarted mo balik npd cya as frequency 2.5ghz..
I tried installing OS ghapon, mo ungot ghapon..

NGANU KAHA NI? unsay sakit? kinsay pasanginlan ani na parts?

NOTE:
-3rd and 4th MOBO, are now working very well, using the same MEMORY, HDD, and PSU, but different
processor, dli na ang e5200..
-PROCESSOR, has NO burns pd..

[boykolotz]

hmm? na test na nmu ug different mobo's nya ang output, the same. probably imong procie cguru jud.

[kevitzrey]

mao lage.. nya ang bnew mobo gane, mao ako use run.. using same memory, hdd, and psu sa katong pag test nako sa e5200.. silbi duda raning akoa na procesor ang prob, ky display nd detected mn gd.. wat u tink mga migo? procie jd? or naa pay lain testinganan?

[Allen]

hmm? na test na nmu ug different mobo's nya ang output, the same. probably imong procie cguru jud.

ask lng ko further boss, ky mostly hang ups, mostly HD ug mobo ang problem, but to think iya mobo bnew ngud so wla gud na prob... ky nagool pud ko y eng-ani na ncounter ni TS... ky gkan nako ang procie nya, ako nag sell niya.
karon papud ko na hear this kind of problem..
procie itself wlay sign of burn or physical damage.

[werty]

so ang mobo ray gi-ilis ilisan ani? hdd and rams still the same(common culprit for problems)?

[kevitzrey]

1st and 2nd mobos, are ddr2 rams.. ang bnew mobo is ddr3 rams, BNEW pd! i used 3 hdd pd, 40gb ide, 80gb ide, and 80gb sata.. mao maka pa display ko sa windows, tungod ky ang 80gb sata, nana OS daan. ni try kog reformat but mo ungot jud cya..


-ky if sa HDD, why mn wala mo ungot karun? im using it now, but different PROCIE. nd 100% pd health nd performance..
-if sa RAMS, why mn wala mo ungot pd? its brand new pd, and i tried it in different mobo, using ddr2 rams pd..


duda rana akoa ang procie, murag sa akong OBSERVATION: UNSTABLE cya ba..
mao na nga ask ko, unsay buhaton pa? para ma torture test jd.. to know da real defect!

[senpai91]

do different kind of test runs, ig every test nimo different ang mga components pang gamiton then do the process of elimination para pag sulbad sa problem.

[rochen]

nkasuway nko ani,daghan kog giilisan hasta psu, pag ilis nko ug procie ok na kaayo. morag symptom ni sya of a failing procie

[butitoy]

elaborate your test :


MOBO1 + e5200 + RAM + CDROM + HIREN CD > burn in

MOBO2 + e5200 + RAM + CDROM + HIREN CD > burn in

MOBO3 + e5200 + RAM + CDROM + HIREN CD > burn in

MOBO4 + e5200 + RAM + CDROM + HIREN CD > burn in




do not put HDD

do not pud VC


be sure ur RAM is good

be sure ur PSU is good

[coolnezz]

hmm CPUs rarely go bad unless it was a victim of a botched OC'ing.
make sure those little gold contacts are clean, do eraser rub thingy.
does the seller still have the original m/b, maybe u can borrow that and test it.
u can also do the suggested steps posted above me.