187 Series
The 2009 Incriminator Audio 187 Series subwoofers were designed to out perform any other subwoofers in their price range. The newly redesigned 187 Series comes standard with many features that one would expect from a much higher priced subwoofer. Double stacked magnets provide more than enough motor strength to perpetuate the voice coil. Woven tinsel leads, nickel plated push button terminals, and a nice wrap around rubber gasket are all features that are usually prescribed for the higher-end drivers, but the 187 Series gets all of them.
Features include:
Stamped Steel Basket
2" Aluminum Voice Coil
Double Stacked Magnets
Double Black Progressive Spiders with Woven Tinsels
Nickel Push Terminals
Wrap Around Rubber Gasket
300 Watt RMS Rated
DVC 4 ohm
Lethal Injection Series
The original Lethal Injection was known for being one of the loudest, best sounding, bang for the buck woofers available in 2003. Five years later, the 2008 model LI is nothing short of the original. In fact, the new LI surpasses the original in every way. Every part has been upgraded to be stronger, better sounding, and LOUDER than ever before!!
This year the LI, like every line, comes STOCK fully loaded. The LI comes standard with our 8 spoke black cast basket with ADC (air-driven cooling), high power handling lead wires, upgraded nickel plated terminals, double progressive spiders, super strong pulp matrix injected fiber cone with high roll surround, CILD (center inter-locking dustcap), much larger double stacked magnets with black nickel finished top and bottom plates, and will be available in 10, 12, and 15 diameters.
Features include:
8 Spoke Black Cast Basket
3 4 Layer Aluminum Voice Coil
Dual Black Progressive Spiders with Woven Tinsels
Injected Pulp Matrix Fiber Reinforced Cone
Dual Layer Foam Surround
Double Stacked Magnets with Black Nickel Finish
Interlocking Aluminum Spider Spacer Assembly
CILD - Center Interlocking Dustcap
ADC - Air Driven Cooling
Nickel Plated Push Terminals
Wrap Around Rubber Gasket
600 Watt RMS Rated
DVC 2 ohm or 4 ohm
Death Penalty Series
The wait is finally over! It has been a few years since the old Death Penalty was put to rest, but the newly redesigned 2008 model DP is here and plans to do everything its predecessor done and more
Shatter windshields, eardrums, and WORLD RECORDS!!
The original DP was designed with two concepts in mind: Price and Performance. The new DP is back this year designed with the same ideals in mind as the original, but with a painful twist. No more standard 4 spoke or 12 spoke baskets. No more off the shelf motor designs or standard cones. This year, every part has been customized to our liking. It features a black cast aluminum 8 spoke basket that will be available in 12, 15, 18, and get this
..21!!
The new motor design is triple stacked 9inch slugs with a black nickel top and bottom plate. ADC, or Air-Driven Cooling is a new method of keeping the voice coil cool by separating the basket and the motor for proper ventilation, this is done effectively with six aluminum column vents. A new custom cone has been added, still made of paper, and black in color of course, but the new cone is much more rigid and will aid in those high SPL applications. A super light 8 layer, flat wound aluminum coil will be used for the high power handling this woofer has to offer. Other features include custom terminals, custom spiders, low gauge woven tinsel leads and a new DP logo on a new larger dustcap.
One more thing about the new DP that makes it great is CILD, or, Center Interlocking Dustcap System which is made for in the field reconing. The dustcap simply locks in to the perfect position for gluing so you dont have to worry about getting it off center. The new, sinister Death Penalty, like all products from Incriminator Audio is designed on the idea of performance first, then looks, but the new lineup of DP series woofers both looks the part, and gets the job done!
Features include:
8 Spoke Black Cast Basket
3" 8 Layer Flat Aluminum Voice Coil
Triple Black Progressive Spiders with Woven Tinsels
Non-pressed Kraft Fiber Reinforced Cone
Dual Layer Foam Surround
Triple Stacked Magnets with Black Nickel Finish
Interlocking Aluminum Spider Spacer Assembly
CILD - Center Interlocking Dustcap
ADC - Air Driven Cooling - Six Column Vents for Max Motor Cooling
Nickel Push Terminals
Wrap Around Rubber Gasket
1500 Watt RMS Rated
DVC 1 ohm or 2 ohm
Death Row Series
Introducing a brand new line of subwoofers is something Incriminator Audio hasnt done in a while. We decided that 2008 would be the year for change. This year IA introduces the DR, short for Death Row. The DR line fills in the power handling gap that is between the LI and the DP. The DR is geared as much toward SQ as it is SPL, so this would be considered by many to be the ultimate SQL woofer. Like all other lines of IA products, the DR comes STOCK fully loaded.
Features include:
8 Spoke Black Cast Basket
3 4 Layer Flat Wound Aluminum Voice Coil
Dual Black Progressive Spiders with Woven Tinsels
Injected Pulp Matrix Fiber Reinforced Cone
Dual Layer Foam Surround
Triple Stacked Magnets with Black Nickel Finish
Interlocking Aluminum Spider Spacer Assembly
CILD - Center Interlocking Dustcap
ADC - Air Driven Cooling
Nickel Plated Push Terminals
Wrap Around Rubber Gasket
1000 Watt RMS Rated
DVC 1 ohm or 2 ohm
Warden Series
After 5 years of engineering the Warden is finally here! The Warden is the next generation of all out SPL monsters. Forget everything youve seen until this point. The Warden is the worlds first true column based neodymium subwoofer that incorporates a common steel top plate. Having one common top plate allows the Warden to generate a uniform amount of magnetic flux throughout the entire gap. This results in a much stronger subwoofer and ultimately higher SPL levels than other subwoofers.
Vehicles that are designed to be high powered SPL machines have requirements that are a bit different than standard daily driven vehicles. They require a subwoofer that can handle extreme amounts of power, both thermally and mechanically, and must be able to do this time and time again. The Warden was designed with SPL competitor in mind, and takes the concept a bit further by increasing the power handling of the subwoofer with a longer 3 8-layer voice coil assembly. To reduce mechanical fatigue and to maintain linear cone movement throughout the stroke a multiple layer suspension is utilized. The custom tooled cone used on the Warden subwoofer is of a composite material that has one of the highest strength/weight ratios on the market. The lead wires are sewn to the suspension pack in order to both eliminate noises from the lead slapping the cone, and to reduce movement of the leads which can cause them to break.
The Warden has been lurking in the shadows for years, the rumors and myths that surround this driver have been circulating the internet for what seems like ages, but its finally here and we consider this to be our proudest accomplishment to date.
Features inlude:
8 Spoke Black Cast Basket
3" 8 layer Flat Aluminum Voice Coil
Quad Black Progressive Spiders with Heavy Gauge Woven Tinsels
Non-pressed Kraft Fiber Reinforced Cone
Dual Layer Foam Surround
6 Column Neodymium Motor Structure
Interlocking Aluminum Spider Spacer Assembly
CILD - Center Interlocking Dustcap
ADC - Air Driven Cooling - Six Column Vents for Max Motor Cooling
Nickel Push Terminals
Wrap Around Rubber Gasket
2500 Watt RMS Rated
DVC .7,1.0,or 1.4 ohm configurations
INCRIMINATOR AUDIO subwoofers
Posting Permissions
