How to Tell if Your RAM has D9Micron Chips?

[poldopunk]

---

I have Kingston Value RAMs (DDR2-667) running in flex-mode dual channel (1 x 1GB, 1 x 2GB). Obviously, it is running at 1.8 volts like most value rams do. Just for the heck of it, I decided to overclock the RAMs all the way to 400 MHz (default: 333 MHz) and left the timings loose (auto) which as you can see, timing is at 5-6-6-18-24. All these settings without voltage adjustments. Here's my question:

How do you know your memory has the legendary D9Micron chips?

I'm just wondering since I have a pretty decent memory overclock over there which effectively transforms my memory to DDR2-800 but with loose timings (will try with 5-5-5-15-20 1T, later). Also, this hasn't been stress-tested, yet.

[poldopunk]

I answered my own question:

DDR2 RAM List and then some, Various DDR2 ICs

it isn't updated though, so i'm still not sure.

[COMCAM]

this is very informative poldo, Im checking my RAMS now.

[Der FüHRER]

I answered my own question:

DDR2 RAM List and then some, Various DDR2 ICs

it isn't updated though, so i'm still not sure.

yup that should do it. & dont worry bout being updated kay micron has stopped manufcaturing the D9GMH & D9GKX chips afaik..so most likely if naay newer revisions/versions (like dominator ver5.1 & above), dili na gyud tingali na D9GMH/GKX

mao niy akong 24/7 settings..slightly underclocked but also way undervolted compared sa specs (1.9v instead of 2.2v), as well as fully enabled ang C1E & EIST:

[nirdle_phogi]

ok .. try ko.. lamat..

[rockford_fosgate09]

thanks sa info,,, il try