Heavy duty oil filter : Baldwin, Donaldson, Mann, Fleetguard

[TWINSCAN]

---

Switch now folks to heavy duty oil filter the likes of Baldwin, Mann, Donaldson for a cleaner, smoother and highly filtered oil to reduce wear and friction which could result loss compression in the long run thereby prolong your engine life. Remember, your filter is as good as your oil and it is like a kidney of human body which cleanses the blood from toxic just as your oil filter it cleanses your automotive blood (your engine oil) from harmful particles that could end up in your engine internals that damages it and cause premature failure....

[TWINSCAN]

Do you want your engine to exceed its average engine life 3 or 4 times longer? Switch to Baldwin, Mann, Donaldson heavy duty oil filter folks for a cleaner, smoother and highly filtered engine oil to reduce wear & tear, friction that cause premature failure and loss compression in the long run. Not only that you extend your engine life you can save time, money, labor in frequent change oil interval because these heavy duty oil filters has 4 or 5 times dirt holding capacity that exceeded OEM standards in filtration and allow you to change oil at every 10,000 kms to 12,000 kms. Make the wise decision now and siwtch to heavy duty oil filters.....

[duneman]

up for Baldwin Filters.... Istorya car owners get now for your car.

fyi, I'm in now way have a business interest/partner nor a friend of the poster. I'm just helping promoting the Baldwin Filters.

[TWINSCAN]

@duneman, thanks bro for helping me promote my Baldwin, Mann, Donaldson heavy duty oil filters. These kind of filters are common in performance cars owners, car enthusiasts, racing, fleet service, heavy duty applications but still uncommon to mainstream users. Get one now folks if you really value your cars and if you want your engine life extends 3 or 4 times longer than its average life.......

[TWINSCAN]

up for today for heavy duty oil filters, switch now to Baldwin, Mann, Donaldson for better protection of your car....

just watch this Mann filter video investigation of the superiority of Mann aftermarket filter vs. OEM

MANN-FILTER Engine Oil Filters... What You Should Know! - YouTube

[weblizzer]

B37 og BT223 sir ang cross sa L14477 Purolator, naa ta available for BT223 at Php450.

maruag gamay man ang bt223 sir? kay sa b37

http://catalog.baldwinfilter.com/Par...rtnumber=BT223
http://catalog.baldwinfilter.com/Par...partnumber=B37

[TWINSCAN]

maruag gamay man ang bt223 sir? kay sa b37

http://catalog.baldwinfilter.com/Par...rtnumber=BT223
http://catalog.baldwinfilter.com/Par...partnumber=B37

boss weblizzer, actually BT223 has much bigger surface area compare to B37 because it has bigger outer diameter of 73.8 mm compared to B37 O.D of 65.1 mm and since both have same height of 88.9 mm thus BT223 has more pleat in its filter media and bigger dirt holding capacity and much bettter filtration because of larger surface area as B37. They only differ in bypass valve setting wherein BT223 is 8 psi much lower compared to B37 of 14 psi. Considering our climate in Philippines which is tropical country 8 psi bypass valve is doing good unless you are into drag racing or in very hot countries 8 psi bypass valve setting is not ok. But which one can get choke or clogged early of course B37 because it has lesser surface area compared to BT223. That is my opinion only, im not an expert in this field though pls pardon me....

[TWINSCAN]

Three factors determine the effectiveness of a lube filter in protecting an engine:

1. Efficiency. The filter’s ability to trap contaminants within the range of sizes most likely to cause engine wear and damage.


2. Capacity. The amount of contaminants the filter media can hold before the pores begin to plug and interrupt proper oil flow through the filter.

3. Service Life. The length of time the filter can successfully perform its functions of trapping and holding contaminants. Service life is dependent upon the capacity and efficiency of the lube filter.

Baldwin, Mann, Donaldson heavy duty after market oil filters exceed OEM standards in filtration in efficiency, dirt holding capacity and of course service life. Switch to heavy duty oil filters now folks to prolong your engine life .....

[duneman]

maruag gamay man ang bt223 sir? kay sa b37

http://catalog.baldwinfilter.com/Par...rtnumber=BT223
http://catalog.baldwinfilter.com/Par...partnumber=B37

@ weblizzer

The BT223 is a mixed media filter filters (called microlite) 98% efficient at 12 microns which is 3 times better than OEM it will also hold 3grams more dirt particles and last long. Tough little filter great for Toyotas. I run a Baldwin B14012on my Nissan Altima, oil is considerably cleaner looking. This filter and synthetic oil will give you 12000klm easy I run them 15000klm (10000 miles) on my wife's car. Oil still looks new.

The BT223 fits all 4cly and 6cly gas toyota's and all D4D engines.<< by dvldoc a guy who knows very well about oil filtration.

hope that might help, on baldwin filters you have to ask them the filter efficiency but on donaldson filters it's included in the filter details https://dynamic.donaldson.com/WebSto...ml?item=193229.

go for it bro and pair it with a good engine oil. fyi i'm using baldwin lube filters; B233 and B1402.

[TWINSCAN]

@ weblizzer

hope that might help, on baldwin filters you have to ask them the filter efficiency but on donaldson filters it's included in the filter details https://dynamic.donaldson.com/WebSto...ml?item=193229.

go for it bro and pair it with a good engine oil. fyi i'm using baldwin lube filters; B233 and B1402.

@ duneman, thanks bro for this informative article about BT223 from dvldoc one of the experts in oil filtration.

up for tonight Istoryans for heavy duty oil filters Baldwin, Mann, Donaldson. Switch now to heavy duty oil filters for a smoother, cleaner and highly filtered oil to reduce engine wear, friction which cause loss compression in the long run. Extend the life of your engine 3 or 4 times its average life......