Page 3 of 4 FirstFirst 1234 LastLast
Results 21 to 30 of 32
  1. #21

    Quote Originally Posted by ronchiejames View Post
    Sa tan-aw nko kinahanglan jud ka og duha ka AP per floor kung gusto jud ka og nindot na RSSI sa client. Elevator shaft kay lisod lapson sa signal kay steel reinforced concrete ni cya, dili ni hollow block with stell rebar. mahitabo ani kay 1 ap on one side and another ap on the other. pero try lang sa og usa. tan-awa lang asa ang pinaka-best na location na makaserve cya sa tanan kwarto if possible.
    If ang internet connection is libre ra sa hotel then no need to invest heavily, pero if they will charge the guest per hour use, then purchase jud og nindot na devices.

    as i have tested before bro... 10m radius maximum of two concrete wall will give you a good coverage( 1 bar ang RSSI but will give you at 54mbps connection.
    Mostly among gamit kay 3com APs and POE switches man pod gud pero medyo mahal pod hinuon, try nalng og netgear or belkin na APs. mas mosalig pa ko kaysa sa linksys. Ive tried installing linksys AP to a client, even though i have placed it in the best position possible, unhappy jud kaayo ang client.
    yes bro. i will try one AP only at the center.. yes internet connection for guests is free. mas maayo makakita ko ug POE nga AP para dili na hasol pag wire sa electrical. thanks sa advise bro.


    Quote Originally Posted by Chipmunk888 View Post
    unsa nay update sleepydeep?
    @chipmunk: bro, wala pako nagstart nagkolekta pako ug information before ko magstart sa project og wala pa pod ko kapamalit sa devices kay libog pako unsa jud nindot nga AP. ill give update as soon as mahaman nako tanan.thanks bro

    Quote Originally Posted by smurfyot View Post
    bro sleepydeepeyed, ang pg.configure ug channels each AP wont affect the clients from logging in, as long as naa cla password or kng wla may password nay signal maka.connect sila.. configuring channels helps minimize flopping, disconnections and unhappy clients hehehe.. with regards s diagram, i can help u out in setting those up in just 3 or 2 days.. hehe..
    thanks bro .very nice info.

    Quote Originally Posted by smurfyot View Post
    opinion r nq.. pwd r mn mugamit ug wireless N or wireless G n linksys AP for ur WIFI connections.. bali, s tan.aw nq.. all u nid is a switch and 7 AP or 7 AP and 7 repeaters depende s kadak.on s area, concrete b or wood b inyong walls den depends pila pud ka clients masud s isa ka floor.. and last but not d least, all this varies from the internet plan u hav from ur ISP.. dats all, BOW..... TY
    thanks bro.very nice info.
    Quote Originally Posted by Kenshiro View Post
    access points that are nearest to each other should have the farthest channels apart to minimize interference.
    And avoid channel 1 since its frequency is used wireless phones(2.4ghz) you would have bad wifi connection when you use it.
    thank bro.very nice info.

    thanks to all bros!

    if maaaproved na ako proposal, magstart nako ug deploy...magpost lang kung unsa man gani result and makaencountered ko ug difficulties. thanks sa inyong tanan.Godbless
    Last edited by sleepydeepeyed; 08-29-2010 at 06:51 PM.

  2. #22
    pwede sad ka mag Apple Airport Extreme as your base station then deploy kag
    upto 5 ka airport express as your AP set as repeaters.

  3. #23
    Tenda Supports POE, so if your switch supports POE then no need for adaptor on the location where you want the AP to be installed

  4. #24
    try to check mesh AP.

  5. #25
    Quote Originally Posted by crx View Post
    Tenda Supports POE, so if your switch supports POE then no need for adaptor on the location where you want the AP to be installed
    bro, why do i need the switch? can't i just connect the AP directly to the switch where my internet router is connected also? or do i need separate switch for the AP only?thanks

    ok ba ang tenda?

  6. #26
    bro, pwd r man..APs connected to 1 switch w/c is connected to ur router. kng ma.configure nmu ang switch for VLAN, den much easier to segregate d flow..

  7. #27
    Haven't tried doing deployments for tenda yet.

    If you want to use POE so that you don't need an AC adapter to your AP, you need a switch that supports POE. This type of a switch has power component on it so the LAN cable carries both the data and power requirements of the AP.

  8. #28
    naa koy extra diri na duha ka 3com wireless N na APs and naa pa pod ko umaabot na 24port 3com baseline POE switch. sobra ni cya sa akong giinstall na wireless network sa hotel that i mentioned sa previous na post.

  9. #29
    very informative thread. mga bro.. kinsa nkasulay ninyu og configure og linksys AP.. na prob ko sa iya configuration... gusto ta nku wala nlng pasword.. then sa configuratin sa linksys AP.. pa butangan ma jud...

    hope naa mka tabang..tnx.

  10. #30
    unsa nmn news ani bro?

  11.    Advertisement

Page 3 of 4 FirstFirst 1234 LastLast

Similar Threads

 
  1. Replies: 29
    Last Post: 08-19-2012, 05:43 PM
  2. 13K budget for the whole pc
    By boholnetcafe in forum Computer Hardware
    Replies: 18
    Last Post: 02-04-2011, 03:54 PM
  3. knasy nka hibaw knang ring for the whole finger?
    By ngehhh in forum Hobbies & Crafts
    Replies: 8
    Last Post: 08-15-2007, 12:09 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
about us
We are the first Cebu Online Media.

iSTORYA.NET is Cebu's Biggest, Southern Philippines' Most Active, and the Philippines' Strongest Online Community!
follow us
#top