weird akong pc..

[hyper]

---

mobo: k9ngm
vcard: 9300gt pci-e
os: xp

mao ni akong prob, when i press the power button, mu boot akong pc pero walay display sa 9300 na vcard.. pero kung ako e plug sa onbord na vcard, na i display. na a piy times when i press the power button, nothing happen, so i have to press the button again (turn off), then press again (turn on again).

unsa may problema ani??

[dongie]

If you have a spare or can borrow another video card, try to change it. If its the VC and its brand new you can have it changed. Good luck

[hyper]

dili kha ni sa akong psu? im just using a generic 400w psu..

[butitoy]

mas sayon ni ug manawag ka nako bro.

sa bios setting ra ni.

[metallica]

try to chek ur mobo pud bro basin ningburot na ang capacitor, try pud another videocard and psu, jst isolate them one by one

[hyper]

try to chek ur mobo pud bro basin ningburot na ang capacitor, try pud another videocard and psu, jst isolate them one by one

mao untay nindot pero limited man gud akong source, wala koy mga spare dire..hehehe

[ZikE]

btaw taw-g nalang na c butitoy

[wombat]

your video card could be incompatible with your motherboard, sounds like a bios update is needed. had the same problem a few years back , this was fixed with a bios update.

[butitoy]

in ur bios set ur video to automatic.

not to nternal /onboard video

[mariox]

in ur bios set ur video to automatic.

not to nternal /onboard video

korekek. sa bios ra na bruh. i disable ang onboard grafx card.