Overclocking ASUS P2 99 mobo w/ P3 450 CPU

[mcduaneski]

---

anyone out there who has or had a P2 99 mobo, Im having problems overclocking mine.
when I set my jumpers to 110 mhz FSB with 4.5 multiplier it goes down to 300 mhz, if I increase voltage to its core it wont start. anyone out there who went through the same thing? Im thinking its a BIOS problem since I havent updated mine yet. Any help would be appreciated. Thanks!!!

[AMD_infinium05]

whats your current FSB and multiplier (stable)... increase one step at a time.. ayaw kalita

[mcduaneski]

akong gibalik sa iyang default 100 mhz 4.5 multiplier. ang incriments man gud kay tag 3 mhz sa jumper settings. was able to get it up to 105 mhz 4.5 mult pero pag saka pa nako ni-ubos nuon ang speed to 300 mhz and when I tried to change the Core Voltage dili siya mu start. 2 settings raman ang voltage sa kini nga MOBO, normal and test.

[kaichip]

We have the same mobo before.. I have a 500mhz p3 processor and a pc133 256mb ram.. Highest overclock nako is 133mhz sa FSB.. Wala na nagstart higher than that.. Maybe sa akong memory na pc133.. maximum na cguro..

I just overclock my computer before when playing diablo2.. after that, balik na nako sa original setting.. Bun-og kaayo imo processor kung overclock ka, labi kung wala kay saktong cooling system..

During sa time na mag-overclock, i usually open the cpu case den paatbangan nako ug electricfan para dili kaayo muinit..

Don't attempt to overclock kung dili ka sure na bugnaw ang environment sa imo cpu..

[AMD_infinium05]

yup..... else... you'll fry your chip before you know it.

[kaichip]

akong gibalik sa iyang default 100 mhz 4.5 multiplier. ang incriments man gud kay tag 3 mhz sa jumper settings. was able to get it up to 105 mhz 4.5 mult pero pag saka pa nako ni-ubos nuon ang speed to 300 mhz and when I tried to change the Core Voltage dili siya mu start. 2 settings raman ang voltage sa kini nga MOBO, normal and test.

basig nasayop nimo taud ang mga jumpers.. Naa man sa iyang manual kung unsa ang jumper setting for a certain frequency sa imo FSB. Before, I cannot change the multiplier.. ambot ngano.. Have you tried changing the multiplier?