Page 1 of 3 123 LastLast
Results 1 to 10 of 21
Like Tree12Likes

So I decided to delid my i7-6700k :)


This discussion is about "So I decided to delid my i7-6700k :)" in the "Computer Hardware" forums.
I've always wanted to try to delid a CPU so I gave it a go. Bought a Rockit 88 Delid + Relid Kit just to ...

  1. #1
    C.I.A. Ityan's Avatar
    Join Date
    Nov 2009
    Gender
    Male
    Posts
    2,048

    Default So I decided to delid my i7-6700k :)


    I've always wanted to try to delid a CPU so I gave it a go. Bought a Rockit 88 Delid + Relid Kit just to be sure. Was tempted to try it with a razer blade but lisud na if masipyat.




    I. Placing the CPU on the Delid Kit


    II. Getting ready to hear that 'pop'


    III. Pag homan 'pop', Dali2 dayun unscrew para tan.aw sa resulta and Tuara!


    IV. Ang salarin!


    V. Clean Cut after cleaning it using my fingernail and cpu cooler warranty card (credit card-like)


    VI. Tabunan ug tape ang kilid for safety


    VII. Hmmm Liquid Metal


    VIII. Ang excess sa die ky ako gi pahid sa IHS


    IX. Reseal gamit ug Silicone Adhesive (Nakalimot kog take ug pic sa application)


    X. Curing Time! (24 hours ang curing time sa adhesive pero I did it overnight lang then gi gamit na pag morning ky wa na kahuwat )



    Moment of truth



    Its Alive! Meet my Rig, Chubby Chibi. (Sensya sa wires)




    RESULTS

    Before Delid (Realbench @4.6 GHz, 5 minutes)



    After Delid (Realbench @4.6 GHz, 5 minutes)



    SPECS

    CPU Cooler: Cryorig H7
    Thermal Paste (Cooler): Gelid GC Extreme(Before Delid) & Cryorig CP7 (After Delid)
    Thermal Paste (CPU Die): Coollaboratory Liquid Ultra
    Case: Fractal Design Nano S
    Case Fans: 2x Front Intake Fractal Design Venturi HF-14 + 1x Back Exhaust Fractal Design Venturi HF-12

    Planning to upgrade my CPU cooler in the near future to test if my procie can hit 4.9-5 GHz but so far I'm happy with my results. The temperatures would have been 1-2c cooler if Gelid GC Extreme gihapon ako gigamit nga paste after delid. Ang problem lang sa Gelid ky after 5 months murag crumbs na siya. But anyways, there you have it. i7 6700k delid operation success!
    Last edited by Ityan; 03-25-2017 at 05:14 PM.
    butitoy, coerce, harhar and 3 others like this.

  2. #2
    C.I.A. ethzneuron's Avatar
    Join Date
    Aug 2007
    Gender
    Male
    Posts
    3,053
    noob question TS and to overclockers diri...

    is it okay to remove the IHS permanently and directly use a cooler to the die?
    this is the same with PCH (PCH pa ako nabal-an, what's new na ba?) and laptop procies as dies are directly in contact with coolers.
    Tech Guru likes this.

  3. #3
    Junior Member lendags's Avatar
    Join Date
    Nov 2013
    Gender
    Male
    Posts
    162
    Quote Originally Posted by ethzneuron View Post
    noob question TS and to overclockers diri...

    is it okay to remove the IHS permanently and directly use a cooler to the die?
    this is the same with PCH (PCH pa ako nabal-an, what's new na ba?) and laptop procies as dies are directly in contact with coolers.
    Actually someone did it in youtube. Iya pa gi ibot ang ang processor lid sa motherboad kay with it, dli mka make contact ang cooler ug ang die. And he had to rig something up pra sa mounts, which is more hassle.
    Tech Guru likes this.

  4. #4
    C.I.A. Ityan's Avatar
    Join Date
    Nov 2009
    Gender
    Male
    Posts
    2,048
    Not sure about PCH. But I think ma short (dli ka abot) ang cooler if direct die.

  5. #5
    C.I.A. ethzneuron's Avatar
    Join Date
    Aug 2007
    Gender
    Male
    Posts
    3,053
    Quote Originally Posted by lendags View Post
    Actually someone did it in youtube. Iya pa gi ibot ang ang processor lid sa motherboad kay with it, dli mka make contact ang cooler ug ang die. And he had to rig something up pra sa mounts, which is more hassle.
    yea, that's one limitation for coolers if they are designed to press into the IHS and not to the die. thnx

  6. #6
    Senior Member
    Join Date
    Oct 2008
    Posts
    922
    Boss, aside sa temps nga advantage niko, any speed gains like extra 500mhz sa imong current OC?!

    - - - Updated - - -

    Nakabasa ko about delid, temps ra ang advantage plus 100mhz. Ambot lang dili ba kaha hasol sigeg reapply ug thermal paste with the risk of damaging sa processor sigeg tang2x taod for maintenance?

  7. #7
    Junior Member coerce's Avatar
    Join Date
    Dec 2009
    Gender
    Male
    Posts
    340
    Hi TS! Rockit88 user here sad! Hehehe

    How's the temps, in stock and full load?

  8. #8
    C.I.A. Ityan's Avatar
    Join Date
    Nov 2009
    Gender
    Male
    Posts
    2,048
    @i.draw.fast, Ang i7 6700k ky 4.0 GHz stock then 4.2 GHz turbo speed. Right now ako OC ky 4.7 GHz @ 1.34v stable. Before delid ky 4.6 GHz rako kutob ky init na keu if patas.an pa.

    From what Ive researched, mas better ang liquid metal if die to IHS compared sa mga normal thermal paste in terms of temps, longevity and para pud to avoid pump out issues. Nai vid sa youtube gpakita CLU after 1 year, so far okay raman: https://www.youtube.com/watch?v=5tQx1LYDKsk
    i.draw.fast likes this.

  9. #9
    C.I.A. Ityan's Avatar
    Join Date
    Nov 2009
    Gender
    Male
    Posts
    2,048
    @coerce, Hehe. Nice. Unsa nga processor imu gi delid? Unsay speed sa imu OC and volts? Liquid metal pud imu gamit?

    Sa ako screenshots, running Realbench @4.6 GHz ky 73c Max temp (Before Delid). After delid Max temp ky 60c nalang. Dili ko ka state pila jud nakuhaan temp before and after ky wala koi thermometer para check sa ambient temps but ang importante 60c tops nlng cya sa realbench. But maybe give or take 10c difference?

    Right now ky Im running it at 4.7 GHz tas 73c iya max temp sa Aida64 stress test (12 hours). If real world use, Rainbow Six Siege(Game) + Firefox w/10 tabs + Skype + Discord + Steam + Malwarebytes ky 66c Max. Not bad.

  10. #10
    Senior Member
    Join Date
    Oct 2008
    Posts
    922
    Quote Originally Posted by Ityan View Post
    @i.draw.fast, Ang i7 6700k ky 4.0 GHz stock then 4.2 GHz turbo speed. Right now ako OC ky 4.7 GHz @ 1.34v stable. Before delid ky 4.6 GHz rako kutob ky init na keu if patas.an pa.

    From what Ive researched, mas better ang liquid metal if die to IHS compared sa mga normal thermal paste in terms of temps, longevity and para pud to avoid pump out issues. Nai vid sa youtube gpakita CLU after 1 year, so far okay raman: https://www.youtube.com/watch?v=5tQx1LYDKsk

    Dili kaabot ug 5ghz boss Hahahaha.... Maayo unta makaabot. So i guess sakto ra pud sa gipost nila nga 100mhz ang gain plus temps nga mu-ubos. Kulbaan ko ug delid pero murag risky ra para nako mugain ug 100mhz. I salute to you boss! Isog gyud kaayo ka mu-mod.

  11.    Advertisement

Page 1 of 3 123 LastLast

Similar Threads

 
  1. For Trade: Try lng. my i5-6600k + cash to your i7-6700k
    By skydive777 in forum Computers & Accessories
    Replies: 15
    Last Post: 10-10-2016, 09:57 AM
  2. For Trade: my i7 2600k to your i7 3770k (i'll add cash)
    By Daryl Dinoy in forum Computers & Accessories
    Replies: 2
    Last Post: 11-05-2012, 10:14 AM
  3. For Trade: My LENOVO G460 i3 to i5 or i7
    By Ian a.k.a Yanski in forum Computers & Accessories
    Replies: 3
    Last Post: 10-14-2011, 01:52 PM
  4. For Sale: Deciding to sell my e90..
    By jakeywakey in forum Cellphones & Accessories
    Replies: 6
    Last Post: 06-25-2009, 08:37 PM
  5. HELP! How to monitor my business so my employees can't cheat on me.. huhu..
    By cookie_cola in forum Business, Finance & Economics Discussions
    Replies: 11
    Last Post: 12-17-2007, 04:56 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
about us
We are the first Cebu Online Media.

iSTORYA.NET is Cebu's Biggest, Southern Philippines' Most Active, and the Philippines' Strongest Online Community!
follow us
#top