Results 1 to 9 of 9

Help, im planning to upgrade my PC


This discussion is about "Help, im planning to upgrade my PC" in the "Computer Hardware" forums.
bro/s na closed to akong topic "please help mga computer enthusiast" gi-tagaan ko infraction kay saup daw akong pag-gamit sa "Help"..hehe sorry istorya! bro/s thanks ...

  1. #1
    Junior Member
    Join Date
    Jul 2010
    Gender
    Male
    Posts
    323

    Default Help, im planning to upgrade my PC


    bro/s na closed to akong topic "please help mga computer enthusiast" gi-tagaan ko infraction kay saup daw akong pag-gamit sa "Help"..hehe sorry istorya!


    bro/s thanks sa nu mga comments/suggestions..pasenxa karun lang jud ko naka-reply, nag-out of town ko gud..

    to EarlZ:
    - mao ni ang result sa test. wala au ko kasabot ani especially sa Prime95 and RealTemp. please comment n dis..hehehe tnx


    to Comcam:
    - bro pasenxa na sa akong na sulti " basta walay palpak " wala jud ko idea lahi diay ang gamig VC and rendering VC..as of now di ko ka-afford sa VC imong na suggest coz student pako..AFAIK mas mahal ang rendering VC kaysa gaming VC..i was planning unta mag-upgrade ug VC GTX-460 and add 2x 2gb ram (8gb ram tanan), maka-tabang kaha sa performance sa akong PC while mag-buhat ko 3d models? sketh-up ang autocad lang akong gamit na software..


    to archt_vin:
    arhitect mo nangita mo ug apprentice?hehehe salamat pud archt sa imong suggestions..mas maka-sabot cguro ka naku kay pareha man ta ug gina-buhat..hehehe maka-irit au mag-hang2x wyl mag-make sa 3d-model..hehe


    to butitoy:
    - bro tnx sa suggestions..naa lang ko ask about Raid0, pwede nimu ma.explain in simple terms unsa na ang Raid0 and how to do it? nag-research ko about ana nalibog ko..hehe naa ko existing 2x 2gb ddr3 1333mhz Kingston ram..ok lang bah additional lang ko ug 2x 2gb ram to make it 8gb ram? ok lang bah ang kingston or do i have to buy higher end rams? wat do u think? lastly ok lang bah gtx-460 lang akong e-upgrade sa akong VC? budget naku sa VC kay 8k lang..hehe


    to rockboi:
    - amaw ka ton nag-tuo nuon cla babay ko!hahaha laki ko mga bros..c rockboi ra mo patol ug laki! ayaw mo kompyansa nya!hahaha


    mga bro/s pasenxa na ninu..di man ko swito ani tanan gud..hehe hinay-hinayan lang ni naku upgrade. im planning mag-upgrade ko 1st sa akong ram, mag-add ko 2x 2gb ram same sa existing ram naku so ang total 8gb na..ok lang bah ang ram or kailangan jud e-maximize jud naku akong mobo which is pwede up to 16gb if in dat case e-baligya nalang naku akong existing rams dn mo palit lang sah ko ug 3x 4gb ram total 12gb ram..ok lang kaha kingston or higher end pajud na ram? mas cheaper man gud ang kingston pero proven man pud dbah?hehehe after mag-upgrade ko ug ram, power supply 750watts ok ra? and VC, im planning to buy gtx-460, ok lang bah? mahal raman kaau 2 ang rendering VC oi, unya nalang nah ma architect naku!hehehehe dn lastly as wat butitoy said mag-upgrade ko sa akong hdd..hehe


    here are the result sa test:

    please comment n ds bro..di lang ni para naku para pud sa mga nagka-problema sa ilang comp especially sa mga naningkamot ma-architect!haha tnx daan ninyo!!!










    - up to 16k man cguro ni xa wala lang naku naku na printscreen..hehehe pero passed japon!hehe

    - ang problema jd au naku kay kung mag-buhat ko model sa sketch-up dn gi-import naku para mag-render ko sa cad mo hang2x while mag-buhat ko sa cad..ok lang man xa nig-render mga 20mins plus kung pinaka-taas na settings sa pag-render akong gamiton..ang maka-irit kay kung mag-edit2x ko sa model using cad especially e-orbit naku mo hang2x xa pero kung e-minimize naku ang cad dn mag-surfing ko or fb, ym smooth raman ang computer while naka-minimize lang ang cad..kung sa sketch-up pud, kung daku na au ang file mo hang2x pud..

    - murag trial and error ni akong pag-upgrade sa computer dah unless kato gi-set-up na pc ni comcam sa australian sure-bol najud di walay palpak!haha

  2. #2
    Junior Member
    Join Date
    Jul 2010
    Gender
    Male
    Posts
    323

    Default Re: Help, im planning to upgrade my PC

    to archt_vin:

    "brad oks ra na. heheh as of now puno pa mi...kaw nahan ka ikaw puli nako?..ahihih

    ok ra na kingston bai, max lang imo rams para mopas2 jud and dili mag lag. imo vc payts ra na 460. ang vc makatabang ra na ug pa crispy tan-awn sa graphics sa imo materials if mag mapping na ka. ug mag photoshop.

    imo psu generic ba na?...maski 500-650w payts ra na"



    - gi-copy paste lang naku architect kay na closed akong 1st post!hehehe

    - di lang tika pulihan arhitect ma-ikog man sad ta nimu..daghan pako kaonon bugas para ma-labwan tika!hahaha

    - cooller master 500W ni ako gamit architect..kailangan pako mag-upgrade ani kung mag-upgrade ko ug ram, VC? or kung mag-upgrade ko ram, VC and HDD as wat butitoy suggested?hehehe

  3. #3
    Junior Member
    Join Date
    Jul 2010
    Gender
    Male
    Posts
    323

    Default Re: Help, im planning to upgrade my PC

    BTW here's my computer spec:

    processor: i5-760 2.8ghz boost 3.2ghz
    mobo: intel P55WB
    ram: 2x 2gb ddr3 Kingston 1333mhz
    graphics: 1gb ddr2 sapphire ati radeon 4650 128bit
    hdd: 500gb Seagate 7200rpm
    power supply: 500W Cooler Master
    O.S.: Windows 7 ultimate 64-bit
    Monitor: Philips 191el LED 18.5"

  4. #4
    C.I.A. archt_vin's Avatar
    Join Date
    Aug 2010
    Gender
    Male
    Posts
    4,330

    Default Re: Help, im planning to upgrade my PC

    bma: brad, actually pareha ta setup sa pc sa office. kusgan na man d i kaau na imo pc ui...reviewha lang to ako gipang post ngadto re sa modeling ug rendering. am sure naka basa ug naka reply to c rockboi ato.

    ok naman na imo psu. kaya ra na niya ang 460 guro ug 16gb rams hehehe ug hdd guro

    basta sulayi lang to ako advise kabahin sa modeling ug rendering. daug na

    hope katabang ni nimo.

  5. #5
    C.I.A. werty's Avatar
    Join Date
    Feb 2003
    Gender
    Male
    Posts
    7,198
    Blog Entries
    1

    Default Re: Help, im planning to upgrade my PC

    ang maka-irit kay kung mag-edit2x ko sa model using cad especially e-orbit naku mo hang2x xa pero kung e-minimize naku ang cad dn mag-surfing ko or fb, ym smooth raman ang computer while naka-minimize lang ang cad..
    -obviously, a better videocard will help with this problem...

    -general advice, get as much RAM as possible. ur mboard can accomodate as much as 16GB. you will need as much free memory for your kind of work.

  6. #6
    Junior Member
    Join Date
    Jul 2010
    Gender
    Male
    Posts
    323

    Default Re: Help, im planning to upgrade my PC

    to arht_vin:
    naka-basa ko ato..salamat au architect!hehehe

  7. #7
    Junior Member
    Join Date
    Jul 2010
    Gender
    Male
    Posts
    323

    Default Re: Help, im planning to upgrade my PC

    to werty:
    tnx bro..mao sad ako plano ang video card and ram e-upgrade..hehe

  8. #8
    C.I.A. eXpLoDe's Avatar
    Join Date
    Oct 2010
    Gender
    Male
    Posts
    6,074
    Blog Entries
    1

    Default Re: Help, im planning to upgrade my PC

    i think na sulti na nila tanan. pwede na nimo ipa close ang thread. just click the report button on the right corner.

  9. #9
    C.I.A. butitoy's Avatar
    Join Date
    Jan 2006
    Gender
    Male
    Posts
    8,942

    Default Re: Help, im planning to upgrade my PC

    naa lang ko ask about Raid0, pwede nimu ma.explain in simple terms unsa na ang Raid0 and how to do it? nag-research ko about ana nalibog ko..
    Standard RAID levels - Wikipedia, the free encyclopedia

    A RAID 0 (also known as a stripe set or striped volume) splits data evenly across two or more disks (striped) with no parity information for redundancy. RAID 0 was not one of the original RAID levels and provides no data redundancy. RAID 0 is normally used to increase performance, although it can also be used as a way to create a small number of large virtual disks out of a large number of small physical ones.

    A RAID 0 can be created with disks of differing sizes, but the storage space added to the array by each disk is limited to the size of the smallest disk. For example, if a 120 GB disk is striped together with a 100 GB disk, the size of the array will be 200 GB

    cons : If there were a probability of 5% that the disk would fail within three years, in a two disk array, that probability would be increased to 9.75%

    Conclusion (mine ) its gud to have this HDD setup for OS | Scratch Disk | Temp File



    hehe naa ko existing 2x 2gb ddr3 1333mhz Kingston ram..ok lang bah additional lang ko ug 2x 2gb ram to make it 8gb ram? ok lang bah ang kingston or do i have to buy higher end rams? wat do u think?
    yes.ok ra ang 4 x2GB as long as same Make| Model | Cas Level

    kingston user man ko bro. so far so gud.but if ur budget can be, have the higher ends.its priced higher cus its way better.

    lastly ok lang bah gtx-460 lang akong e-upgrade sa akong VC? budget naku sa VC kay 8k lang..hehe
    one thing is sure. that's a gaming VC with CUDA and Physix.

    it may not be as gud as the dedicated render VC but its gud enough

  10.    Advertisement

Similar Threads

 
  1. help:plan to upgrade my core2duo pls suggest
    By mrrelente in forum Computer Hardware
    Replies: 40
    Last Post: 03-11-2011, 09:46 PM
  2. Help!!!i want to upgrade my PC
    By chilyu88 in forum Computer Hardware
    Replies: 15
    Last Post: 06-22-2010, 08:34 AM
  3. plz help im planning to build new pc
    By Carnifex in forum Computer Hardware
    Replies: 9
    Last Post: 03-11-2009, 11:17 AM
  4. need some suggestions, planning to upgrade my pentium D PC
    By butchix in forum Computer Hardware
    Replies: 28
    Last Post: 02-03-2009, 04:24 PM
  5. COMPdoctor i need help. I WANT TO UPGRADE my PC
    By spider_arn in forum Computer Hardware
    Replies: 8
    Last Post: 12-12-2007, 09:59 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
about us
We are the first Cebu Online Media.

iSTORYA.NET is Cebu's Biggest, Southern Philippines' Most Active, and the Philippines' Strongest Online Community!
follow us
#top