All about Smart Bro

[kerman]

Whats the difference between this two kind of connection from Smart bro.? Anybody here in cebu using this SME connection? pls. post some comments about this.. thanks a lot

[AMD_infinium05]

ang price lang... :P

[kerman]

Having Static Internet IP address from ISP can also contribute a faster speed of our internet connection at our home. Rather than using Dynamic Internet IP address from ISP only? correct me if i am wrong?

Pldt myDSL have static ip address given by ISP?

[cloud]

Quote: Originally Posted by keanel01 my current ip ad for pc#1 is 192.168.1.2, gateway 192.168.1.1,subnet 255.255.255.0,dhcp server 192.168.1.1, dns 203.84.191.216, 121.1.3.208, 121.1.3.199 pc#1 is dynamic ip---- the internet connection is fine pc#2 is dynamic ip---- "limited or no connection" tapos pag nag- ipconfig/release, ipconfig/renew ang lumalabas ganito "An error occured while renewing interface local area connection: An address incompatible with the requested protocol was used." my configuration is like what you have said.. smartbro connected to router port WAN pc#1 connected to router port #1 pc#2 connected to router port #2 what could be the problem of my pc#2...? i cant browse the internet. but i can see the shared files and i can browse the "my network places" of pc#1 thru my pc#2.. plss help me..

you cannot connect to the internet since your pc#2 doesn't have an IP address. try manually putting an ip address something like this

ip address = 192.168.1.5
subnet = 255.255.255.0
gateway = 192.168.1.1 =router's ip address

if this still doesn't help try swapping LAN card from PC#1 and PC#2
if PC#2 works after swapping then LAN card is defective.

[AMD_infinium05]

Quote: Originally Posted by kerman Having Static Internet IP address from ISP can also contribute a faster speed of our internet connection at our home. Rather than using Dynamic Internet IP address from ISP only? correct me if i am wrong? Pldt myDSL have static ip address given by ISP?

some who requested for this static ip. most are still DYNAMIC.

[msinternetcafe]

i have here a used dlink modem router
http://www.dlink.com.ph/products/sup...d=310#firmware

i used this before when i had a cafe before i connected using this modem router.

does anybody here have used this product ? i need your inputs if this product is okay or not to use with smart wireless bro.

ty

[cloud]

I think it cann't be used since most Modem Router dont' have WAN ports. Just check you modem if it has a WAN port aside from LAN ports . :mrgreen:

[junmar4]

Quote: Originally Posted by msinternetcafe i have here a used dlink modem router http://www.dlink.com.ph/products/sup...d=310#firmware i used this before when i had a cafe before i connected using this modem router. does anybody here have used this product ? i need your inputs if this product is okay or not to use with smart wireless bro. ty

you can't use this kay ADSL modem/router man ni... buy na lang baratohon na router, naa tag 1k sa buy and sell.

[msinternetcafe]

i have 2 lan already installed in my pc. lan1 from mb and lan2 cnet card i bought.

[img width=500 height=444]http://i119.photobucket.com/albums/o157/marksatoy/ip.jpg[/img]

i used this ip setup above then

[img width=500 height=375]http://i119.photobucket.com/albums/o157/marksatoy/errormsg.jpg[/img]

i got this error after i click on allow internet connection from this pc

im trying to configure my share internet connection using my pc as server.

pls. help ty

[junmar4]

sa LAN 1 na? or LAN 2?

for LAN 1 use:

ip address: 192.168.0.1
subnet: 255.255.255.0
gateway: 192.168.0.1

sa LAN 2 use:

ip address: 192.168.0.2
subnet : 255.255.255.0
gateway: 192.168.0.1


LAN 1 is where smartbro is connected while LAN 2 is going to the switch.

[msinternetcafe]

k

[msinternetcafe]

im not using switch router. ill be using my surecom hub

[cloud]

Better yet use this settings

for pc#1 LAN 1 use:

ip address: obtain an IP automatically (smartbro will automatically give an IP address)


for pc#1 LAN 2 use: connected to hub
ip address: 192.168.0.1
subnet : 255.255.255.0
gateway:

then PC#2 connected to hub

ip address: 192.168.0.2
subnet : 255.255.255.0
gateway: 192.168.0.1

use same workgroup in all computers.
set pc#2 to connect thru another computer for internet connection.

:mrgreen:

just pm me. i've used this setup before. now using router more simplified.

[cebutrader]

I guess there's no difference in the speed since they are giving away canopy and according to the canopy site it has a max bandwidth throughput of 500kbps, if they are gonna sell you a 1mbps connection via smartbro and will cost more than a Globe 1mbps @ 1,295.00, get yourself a globe adsl subscription, with a 1mbps connection it goes with a phone line pa.

[cebutrader]

smart bro
|
linksys router (mac cloned) <-- get ip from smartbro thru dhcp, changed the subnet of the dhcp server in your linksys router to 10.0.0.1 and make it deploy 10.0.0.2-10
/\
pc1 pc2


pc1 == 10.0.0.10
pc2 == 10.0.0.9

gateway and dns == 10.0.0.1

if d mo work :

1. e static ip.
2. ping 10.0.0.1 from pc1
3. ping 10.0.0.1 from pc2
4. ping each other
5. reply to this thread.