Using prolink 9200 for pldt mydsl, how?

[alterX]

before i leap to the other side i want to try it out first. pwede ba nako magamit ako GBB modem/router prolink 9200 to pldt mydsl? ako nxt door kay pldt man & he would allow me to try his line. unsa on man pag setup/configure ang prolink nako? thanks daan!

[AMD_infinium05]

use pppoe, your username and password should be the same..

VPI/VCI: 0/100

commit and restart modem, chck if you now have internet

[vanguard]

BTW, what's VPI/VCI? I'm using Prolink HP 9200 too but my VPI/VCI is set to 0/35. 0/100 doesn't work for me.

[alterX]

i remember pag install sa technician sa ako friend mydsl deretso ra man, wala UN & PW. ipconfig ra man tu iya gi type then work dayon internet. wala nako na try ang suggestion above coz i didn't ask for the UN & PW of my nxt door coz i thought plug & play ang pldt (or is it?). and another thing, sa ako GBB even if dili pa properly na config siya, steady na man ang ADSL light, whereas, sa pldt line sige lang blink. any thoughts? any more ideas there? salamat daan!

[Chipmunk888]

Quote: Originally Posted by alterX before i leap to the other side i want to try it out first. pwede ba nako magamit ako GBB modem/router prolink 9200 to pldt mydsl? ako nxt door kay pldt man & he would allow me to try his line. unsa on man pag setup/configure ang prolink nako? thanks daan!

all adsl2+ modems are compatible with pldt in any of their network. adsl2 models is compatible with ipdslam and legacy. adsl model is compatible only with their legacy.

that prolink9200 is adsl2+.

first thing to know if your pldt line is dynamic or point-to-point protocol of ethernet type.


as per amd_infinium said, configure also your virtual path identifier and virtual channel identifier to connect the right virtual circuit to their atm switch then choose the right type of dsl in accordance with your line.

[alterX]

0/35 is for GBB. Globe ka, right? ako man gud gusto e try ang pldt sa b4 ko mo transfer kng ok ba ang speed sa amo area. mao na ask ko diri f pwede ma config ako GBB prolink 9200p right now using the pldt line. tnx!

[alterX]

yes, i was to try the 0/100 & the dsl type - getting a clue from cdrkings router manual but then i cant continue kay wala man ko UN & PW. my nxt door dont even know those. wala man siya taga e pag sugod pa gyud. any more ideas? ty!

[Chipmunk888]

Quote: Originally Posted by alterX yes, i was to try the 0/100 & the dsl type - getting a clue from cdrkings router manual but then i cant continue kay wala man ko UN & PW. my nxt door dont even know those. wala man siya taga e pag sugod pa gyud. any more ideas? ty!

if they dont have that username and password then obviously they are either in ipdslam or in ngn network.

so its dynamic type, configure that to the modem and connect like a plug n' play.

[alterX]

@chipmunk -

thanks sa mga ideas, pero very noob here master, hehehe, care to elaborate, ty a lot!

[nissanss]

ok, i am interested, too.
here's my prolink quick config page, now, how should it be set? thanks!

[rlcrl]

expand ang "Encapsulation" para makita nato ang choices

[nissanss]

thank u, i think i got this figured now. i am using the '1483 Bridged IP LLC' encapsulation.
in fact, i am using it now. here's the page -



@rlcrl, here's the encapsulation -


thanks!

[rlcrl]

good, problem solved! pwede i-lock