reset cmos of mobo

[whoopz]

Good day istoryans, i have a c2d e6300 with MSI p965neo-f mobo. nag oc ko ani then....

i've noticed that whenever i want to set the mobo back to its default setting by shorting the jumper to 2 & 3, wala raman mahitabo... all of the settings remain the same. unya mga 5 minutes manako g-short ang jumper before returning it to 1 & 2.
what's wrong with this?

ako ra gibuhat ky g-select nalang nako ang option nga load optimized defaults.. does this have the same effect as pag short sa jumper?

[CeeJay]

short the jumper then turn system on... it shouldnt boot.. depende sa mobo mu andar ra quickly then off... some kay mu andar but no video or bios... return jumper then check bios... if it fails... take the battery out when resetting cmos, cut ac power and hit power buttor to clear power from capacitors... sharo...

[jopam]

bro, sakto ceejay, by the way preha man ta proc ug mobo hehe, im also looking for those who have same mobo as mine much more preha jud ato proc e6300, 1. unsa d i imo bios version? 2. up to asa nimo gi oc? 3. unsa imo ram na gi gamit ex: ddr2533 o 667 0 800? kung 667 imo ram i would advice na up to 333fsb lang kai mao nay safe oc ana. by the way any problem u encounter so far?

[CeeJay]

hmm, its now looking like you need a bios upgrade if mao sad ang prob ni jopam.

[jopam]

hi ceejay actually i never had a problem with mine so far kai wa man ko ka try ug oc, hadlok ko hehehe, yes but you are right again, bios update is some solve a lot of issues much more on overclocking, mine im still observing the jmicron, i may update my bios if im going to encounter again that problem, the problem is this although i resolved it, ang ako optical drive duha isa dvdrom, isa dvd-rw, naunsa man 2 days ko wa ka gamit ako pc kai na bz ko what happend wala ma detect ang dvd-rw(secondary slave) sa jmicron, so what i need ako gi on ang pc ug balik gi detached sa nako dvd-rw,so ang dvdrom ra sa then after a while ako gi shutdown napos gi connect balik and dvd-rw then na ok na back to normal na, hhhhmmmm mataling haga, what you think what happend? what may be the cause need some opinion to why is that. thanks

[whoopz]

Quote: Originally Posted by CeeJay short the jumper then turn system on... it shouldnt boot.. depende sa mobo mu andar ra quickly then off... some kay mu andar but no video or bios... return jumper then check bios... if it fails... take the battery out when resetting cmos, cut ac power and hit power buttor to clear power from capacitors... sharo...

you mean i-short nako ang jumper then i-on? i haven't tried that yet bro ky ni ingun man ang manual nga never turn on your pc when the jumper is set to short coz it might damage the mobo. ako sulayan nang removing the battery and cutting the ac power coz wala ko kasulay ana. removing the battery results in resetting of cmos man diba?

[whoopz]

Quote: Originally Posted by jopam bro, sakto ceejay, by the way preha man ta proc ug mobo hehe, im also looking for those who have same mobo as mine much more preha jud ato proc e6300, 1. unsa d i imo bios version? 2. up to asa nimo gi oc? 3. unsa imo ram na gi gamit ex: ddr2533 o 667 0 800? kung 667 imo ram i would advice na up to 333fsb lang kai mao nay safe oc ana. by the way any problem u encounter so far?

mura 1.6 man tingali version nako sa bios. up to 2.3ghz rako taman ga oc bro ky pag 2.4 na mag hang naman ang pc. im using 2pcs. 1gig geil ddr2 800. so far, no probs encountered... ang ako na notice sa ako proc ky init cya compared to my previous a64 socket939. ako e6300 ron kay mag idle at about 42 and load at about 49. normal rani sa e6300?

[whoopz]

@jopam, pila diay idle and load temps sa imo e6300 ron? ask lang ko para maka compare ko. hehehe...

[jopam]

whoopz 47 idle nako 55 full load bugnaw pa gani na imo, kung mag aircon ko pre ha ta 42 idle 49 to 52 load...ako naman gi search na bro ok ra man gani ni ako temp, bitaw ako 939 A64 3000+ mas ubos bitaw jud to. unsa man imo gamit heatink ang stock ra man kaha.?

[whoopz]

ah, normal rajudiay ni nga temps. hehehe... init judiay ni cya. stock ra ako gamit hsf bro. i know someone nga gigamitan niya ug much better nga hsf iya e6300 pero gamay raman ang ni ubos sa temp niya.

[jopam]

ok na man na stock hsf, wel if imo pilion kadto hsf na pure copper kadto kita jud nimo deprencya ato, labi na if overclock ka, whoopz ngita lagi ko sata na optical drives kai para di nako gamit sa jmicron, duha man gud ako optical drive dvdrom, ug dvdram, ikaw pila kabuok imo optical drive? wala man nuon ko prob maka burn man gihapon ko, pero ako windows movie maker di ka kita sa ako dvd-rw, anyway wala naman sad ko gamit sa windows movie maker lain man ako gamit ug ok ra man pod, pero palit jud ko ana optical drive na sata if available na, naa sa pcx pero isa ra ka brand so far,

[whoopz]

im just using 1piece 80gig ide hardisk and 1piece ide dvd writer. no problems encountered. im planning to buy 160gig sataII hardisk. but if naay available nga sata optical drive, i think i will upgrade with that too. coz the i just bought an 8800gts videocard and mu overlap cya sa ide slot sa ako mobo which is a problem ky dili cya ma insert maayo sa pci-express slot because of this.

[jopam]

whoopz wa ba d i ka kita ana sa internet na gi insertan na 8 series masangko jud sa ide kai taas mana mao bitaw na isa sa ako gi consider, pero di na ko ka afford ana basin mag ATI lang ko 1650, pero nindut jud bitaw ang 8 series kai dx10 na. if mag 8 series ko basin 8500gt sonic, pero unya na kung mailisan nako sata ODD.

[whoopz]

Quote: Originally Posted by jopam whoopz wa ba d i ka kita ana sa internet na gi insertan na 8 series masangko jud sa ide kai taas mana mao bitaw na isa sa ako gi consider, pero di na ko ka afford ana basin mag ATI lang ko 1650, pero nindut jud bitaw ang 8 series kai dx10 na. if mag 8 series ko basin 8500gt sonic, pero unya na kung mailisan nako sata ODD.

ulahi nako nakabalo ani bro... heheh... altho wala jud nahurot ug insert ang contacts saako vc, i was still able to lock it in place and nagamit rapud nako pag play, ok raman pud cya. depende lang pud tingali sa layout sa mobo coz my previous mobo nga asus pci-ex gyapon and pang pentium D lang, iya ide ky naa man sa kilid so dili jud to masangko.

[jopam]

kini ato mobo naa sa luyu jud ang ide, ug slim baya ni na mobo, mao bitaw gisaway ang MSI tungod lang ani na layout, anyway if nataud nimo then congrats, ako bro paabot lang ko sa 8600gt leadtek di kai mahal ok ok ra less than 10k, leadtek pipe edition...ga oreder nako abot to nex week. pero next year balik ko AMD....