Problems Turning On the Computer

[Metz]

kung akong i-on using the power button usahay igo ra mo turn on nya palong dayon.
Mga solutions nako kay:

1. palungon napud nko ang AVR hulat a few mins, then try again. Usahay mao gihapon or mo-on na cya
2. OR ibtun nko ang IDE sa akong HD, kabit balik nya try again.

kung mo turn on na, usahay 2 ang results,

1. Either normal boot
2. OR mo ad2 BIOS kay naa daw ni change sa settings sa speed sa akong Processor, maski wa nko hilabti.

any suggestions?

[vrad03]

try to check ur PSU, clean RAM connectors with eraser...

[dredd41v576]

try reseating the power supply connector that goes in to your mobo (it's the biggest connector). Be sure to turn off all power before doing this.

[Metz]

my PSU as well as RAM is good Ive been having this same probem even before I had a new PSU and RAM

is it possible that my IDE cable might be defective??

Quote: Originally Posted by dredd41v576 try reseating the power supply connector that goes in to your mobo (it's the biggest connector). Be sure to turn off all power before doing this.

ill try this

[darkdevil]

unsay mga device ang naa sa imo system..
like auxillary fans, drives, cd roms and etc
basin 300watts ra imo psu tapos perti daghana naka connect...

[bossdak]

basig lo batt na ang battery sa imong MB. basin lang.....

[emoners]

kaluoy nimo bro, sige rag ibot-ibot...basig manga-pangag sad imo pins ana. try checkng daw mga connections/wires....maybe naay luag or defective wire

[Metz]

Quote: Originally Posted by emoners kaluoy nimo bro, sige rag ibot-ibot...basig manga-pangag sad imo pins ana. try checkng daw mga connections/wires....maybe naay luag or defective wire

basin.... guwang nasad kaayo akong IDE cables mao pulihan lng nko ni. 400 or 450 watts mani akong PSU.

Diba kung low batt ang mobo system clock raman ma apektahan??