Post your RIGS 2009

[centax error]

Quote: Originally Posted by simoko @ centax error: my hats off...pirting paytera ana nga setup, pwede gamiton for daily use...4GHz w/ rams at 4-4-4-12 timing....u cud not ask for more...tinuod gyud siguro ang buzz didto sa XS nga the E5200 is the new OC wunderkid...congrats bai...

thanks bai...here's the screenshot of the 8 hrs prime test:

[centax error]

Intel E2160
DFI UT P35 T2RS
Crucial Ballistix 2x1 GB 1066 MHZ
Palit 9600 GT + Scythe Musashi VGA Cooler
True Copper + Sunon 120 Fan
Silverstone DA 750
Antec 300





Tamiya spacers to simulate height of the mobo standoffs so that the motherboard will not cave in once the nut is fully tightened from the back of the casing back panel:

Have to ditch the included bolt for a longer bolt that was then fastened to the back of the casing back panel in order to support the massive 2 kgs weight of the True copper + Sunon fan combo:





CPU-Z validation for the 100 % OC but have to settle @ 3.5 ghz so that vcore is below manufacturer's spec for 24/7 use:

[glide 1]

Quote: Originally Posted by centax error thanks bai...here's the screenshot of the 8 hrs prime test:

Wow nel - i see you've been bz this holyweek nice 4ghz on that e5200.

Pilay vcore and temps anang xeon nel @ 3.6ghz?

Impressive and cleeeeean cable management as usual from you. nice nice nice.....

[nestlE]

centax,

bai nice set-up. saludo ko. hehehe. mao ni ang overtime sa holywk?

[dcars]

@centax,


nice clean setup bai! where did you get your stuff?

[dcars]

Quote: Originally Posted by dmelsie e post lang nako ang rigs sa balay before ko mo goodbye sa pc diri goodbye rigs hehehe specs: amd 7750 3.0ghz biostar ta 790gx g skill 4gb ddr2 800 ati 4850 seagate 320gb st60f silverstone ps02b ocz xtz memory cooler thermalright hr 05-ifx and ifx/sli samsung sh 223f sunbeam and silverstone fans vantec nxp viewsonic 19" logitech keyboard and mouse xfree speaker logitech rumble pad 2 amd x2 4800 @ 2.8 ghz gigabyte 780g transcend 4gb ddr2 800 seagte 160gb sata seagate 1tb sata modified orion case 500w generic psu hehehe lite on dvdrw lg 19" monitor a4tech webcam altec lansing 2.0 speakers logitech keyboard and mouse sunbeam ccfl sunbeam led case handle hope madayon ang akoa plan puhon puhon goodbye my old rig

power kau mog setup bai!

[centax error]

glide 1: did you mean the e2160? @ 3.6 ghz needs 1.5275 vcore to pass prime
nestle: wa ko kuyog sa family outing this year bai...nag pabilin ra ko sa balay hehe
dcars: got most of the stuffs here in istorya at the used section- mobos from lunch and weezur

[vashtinone]

@centax error nice set-up bro..

waaaaaaaaaaaa.. kasuya dah.. hhehe.. dli na ko kaOC kay baloyloy akong mobo na gigamit.. hehe

[bleed214]

nindot man sad diay ug porma ang Antec 300

[dmelsie]

Quote: Originally Posted by centax error glide 1: did you mean the e2160? @ 3.6 ghz needs 1.5275 vcore to pass prime nestle: wa ko kuyog sa family outing this year bai...nag pabilin ra ko sa balay hehe dcars: got most of the stuffs here in istorya at the used section- mobos from lunch and weezur

OT:
nice one pareng arnel hehehe
nag outing man sad kag imoha sa imong rig lol
nindota sa true copper oi pang xmas gift nlng nako na puhon if di naka ganahan ana

[EarlZ]

@centax error

The TRUE copper might be sucking hot air directly from the VGA card, i also tried that kind of orientation on my setup, i got 3c worse temps.

[centax error]

Quote: Originally Posted by EarlZ @centax error The TRUE copper might be sucking hot air directly from the VGA card, i also tried that kind of orientation on my setup, i got 3c worse temps.

earlz, the Sunon fan that I am using is thicker than the standard 120 mm fans and with this, I can't use memory with high profile heatsinks (like my dminator) if I mount it the other way unless I use the fan to pull hot air. I really find this to be more convenient because I like to switch between different memory models as I am still in the process of finding which RAM is perfect for my need. So far, core temps are not an issue but would re consider once it becomes an issue then.

[Mildseven]

nice jud d i ang antec 300.. weee time to change case nasad.. nahan ko limpyo.. clean.. nag alangan man gud ko kay ang 4 pin power connector ba.. layo kayo.. naa man gud sa ubos ang PSU.. pede ra sad d i mag sumpay.. ingun anaon nalang nako para limpyo ghapon.. yes yes yes..

well sa E5200 sayun jud kayo i OC.. using asus triton 70.. i hit 3.8.. forgot the vcore ako na set.. bati gani nga board ako gamit.. P5N-MX.. but still it hit that 3.8.. wa lang nako g utingkay pag ayo.. kay test test man lang to nako.. d man sad to ako gud.. sa ako man KOSTOMER.. hehehehe....pero sa pag gamit na.. bitay sya sa E7200 runing 3.8.. same gani sila with 4 Gb RAM... pero with the price that cheap.. hands down ko

[usrolla]

nice jud ang antec 300.... ma klaro nmo nga nindot ang materials used sa case

[glide 1]

Agree ko ninyo tanan, gwapo kaayo antec300 for the price, daghan modz mabuhat.

here's 1 with a side panel cut out and plexi installed.