Car Tuning/Upgrades - Discussions, Tips, etc..

[jogal]

Quote: Originally Posted by jackson428 change to a better gas shocks.. but so far sa ako mga friend na naka civic most of them just use the stock shocks kay nice mn gihapon ang ride bisan stock with lowering springs but maybe weak na imu shocks boss.

thanks boss pa check nko tgalig weak na ako shocks..

[baLLooN]

Quote: Originally Posted by jackson428 naa mn mo engine swap na mga shop dri but mag depende jd na sa mo trabaho and ang job na kailangan buhaton. ang problem lng anah kay ang wiring labi na gi putol and wiring harness sa engine. labad kau sa ulo ng ing-ana and uban pd kay daghan kau fabricate na mga parts labi na ang engine is from another manufacturer nya ang body kay lain pd.. hehehe anyways sa ako nahibawan kay textar can perform a heart transaplan sa awto. saw a carb honda hatch transplanted with a d15b turbo didto some time ago. and im sure naa pa pd lain shops who can do the same job

ahh ok...k sa manila man gud bro k mani ra kaau ni nla ang wirings and transplant...makaya ra man gani ug 1-2 ka adlaw ang pg swap...hnuon mga hardcore na kaau 2 cla ngad2 maski unsa lang ang ma hunahunaan.

[jackson428]

Quote: Originally Posted by baLLooN ahh ok...k sa manila man gud bro k mani ra kaau ni nla ang wirings and transplant...makaya ra man gani ug 1-2 ka adlaw ang pg swap...hnuon mga hardcore na kaau 2 cla ngad2 maski unsa lang ang ma hunahunaan.

biya pa kau ang cebu boss in terms of swapping boss. kasagaran jd magpa swap og efi engines diri kay mag lisod bsta putol og wiring harness. but naa ra jd nah.. medyo mahal lng.. hehehe sa manila kay kinaon na nah nila ang mga engine swap.. humanon tanan in 1 to 2 days dala na overhaul sa makina. grabeh kau ka hardcore hehehe

[route28]

bitaw nindot au sa manila kay mau sila mo transplant,sayon ra nila ang mga wiring...unsa na shop kaha diri inyo ika recommend?

[drag_racer]

Quote: Originally Posted by route28 bitaw nindot au sa manila kay mau sila mo transplant,sayon ra nila ang mga wiring...unsa na shop kaha diri inyo ika recommend?

kung ganahan ka engine swapping, upgrades or modifications kung sa cebu lang kaya ra kaayo sa acr bos...

[route28]

Quote: Originally Posted by drag_racer kung ganahan ka engine swapping, upgrades or modifications kung sa cebu lang kaya ra kaayo sa acr bos...

kadungog ko acr mau daw na sila,pero kasagaran honda ra ako makit an..ok ra pa upgrade bisan unsa awto diha boss?1st gen eclipse akoa boss..

[entrepreneur101]

mga master asa ta makapalit og headers kit para sa corolla 95?
or ipa buhat rana cya.

[cHoLoCoY]

ok,..... worked on my car a about a week ago,.... i got a set of Centerline wheels thats a 15 x 9 all four (not really sure but the guy told me that its -34 or -37 offset,...... measured it n has a 5" lip) wrapped 195/50r15 (its pretty stretched but doesnt look like it coz of the thick tire wall of the Potenza tires i used)

wouldn't fit on my Eight Six,.... came out about 1.5" - 2" out of the rear fender.... my car is really low,... n raising it wasn't an option for me n how i want the car to sit.

here's how'd it looked on the first test fitting




so,.. worked on my car,.... installed some new parts n flared out the fender (a really quick flare out job with a fender roller n heat gun)


as you can see its not perfect




kinda messed up my car,..... i mean i really F_cked up it up,.... but i also wanted to slap those sick old school wheels on....

ok,... heres a few angle pix of how it looks on the car n the fender to,....








so here's the thing,...... the Centerline wont fit the front unless i install fender flare kit.

i have 2 options,.... just keep it how its is now n just have the rear fender professionally done..... but i wont be able to run the Centerline on the front

and the other is go with a J-Blood fenders,... w/c look like this



so tell me wat you think,.......im still confused on wat i wanna do,....

[GTlik]

ill go for option 1... have ur fenders professionally done. stock fenders looks better than the J-Blood. IMO..
BTW.... nindot kaayo ug barog imo awto with those rims!

[kalawkaw23]

guys any ideas sa cruven

[KE-25]

Quote: Originally Posted by GTlik ill go for option 1... have ur fenders professionally done. stock fenders looks better than the J-Blood. IMO.. BTW.... nindot kaayo ug barog imo awto with those rims!

Choloks my man !!! great to see u've been busy with your AE ..Looks good

I'll have to agree with GTlik on this , I go for option 1 as well , I have this thing with keeping stock all the way. But think about your options, if keeping it stock hinders you from running efficiently and effectively and your more inclined to run vs restore then id say walk on the wildside and .... yes

[cHoLoCoY]

is that u junicx? (Antonio)

thats what i really want to go with to,..... stock boby with the sickest old school wheels with a FAT LIP,....

i wanna run all four Centerline on my Eight Six,.... the front fenders is all ready cut n rolled,.... maybe i should flare it out,..... and that will f_ck up the paint

(i dont like widebody kits,.... but i kinda like how the front J-Blood fender looks like,..... the vent on the fender is too much for me,..... but i like the over all line on the fender though,... the rear is a different story)

[KE-25]

Its Ron ....

Junics is probably still snoring , we were all busy doing the autocross yesterday

[cHoLoCoY]

i saw the pix,...... looks like it was a bad asss event,...

[mike_unilab]

When i search the forums, i keep hearing about PCD when they talk about mags. What does it mean and how does it affect me if i choose to buy mags.

Thanks for any help.